A comparative study on the effect of aging on mechanical properties of LLDPE–glass fiber, mica, and wood fiber composites
Authors:
- 5 September 1990
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 40 (5-6) , 645-655
Abstract
Linear low density polyethylene (LLDPE) was reinforced with wood fiber, glass fiber, and mica. The effect of aging on mechanical properties of the composites was examined under different conditions: (i) exposure at 105°C for 7 days; (ii) immersion in boiling water for 4 h. Samples containing glass fibers showed by far the best results with regard to tensile strength, elongation, and fracture energy. LLDPE filled with mica produced poor results compared to wood fiber composites. Dimensional stability of LLDPE–wood fiber composites, after boiling water treatment, was inferior to mica and glass fiber composites.Keywords
This publication has 12 references indexed in Scilit:
- Use of wood fibers in thermoplastics. VII. The effect of coupling agents in polyethylene–wood fiber compositesJournal of Applied Polymer Science, 1989
- Kinetics and equilibria of water sorption in LLDPE–cellulose compositesJournal of Applied Polymer Science, 1986
- Use of grafted aspen fibers in thermoplastic composites: IV. Effect of extreme conditions on mechanical properties of polyethylene compositesPolymer Composites, 1986
- Use of wood fibers in thermoplastic composites II: PolyethylenePolymer Composites, 1985
- Wood fibers as reinforcing fillers for polyolefinsPolymer Engineering & Science, 1984
- The Efficiency of Cellulosic Fillers in Common Thermoplastics. Part 1. Filling without Processing Aids or Coupling AgentsInternational Journal of Polymeric Materials and Polymeric Biomaterials, 1984
- Use of wood fibers in thermoplastic compositesPolymer Composites, 1983
- Ultrasonically delaminated and coarse mica particles as reinforcements for polypropyleneJournal of Applied Polymer Science, 1982
- Shear flow rheological properties, fiber damage, and mastication characteristics of aramid‐, glass‐, and cellulose‐fiber‐reinforced polystyrene meltsJournal of Applied Polymer Science, 1980
- An experimental technique for predicting foam processability and physical propertiesPolymer Engineering & Science, 1976