Magnetron-Sputtered Amorphous Carbon Films for Aluminium Proton-Exchange-Membrane Fuel Cell Bipolar Plates
Open Access
Abstract
Aluminium is an attractive material for proton-exchange-membrane fuel cell bipolar plates as it has a much lower density than steel and is easier to form than both steel and graphite. This work focused on the development of amorphous carbon films deposited using closed-field unbalanced magnetron sputtering (CFUBMS) in order to improve the corrosion resistance of aluminium bipolar plates and to enhance fuel cell performance and durability. Chromium and tungsten adhesion layers were used for the coatings. It was possible to achieve good electrical conductivity and high electrochemical corrosion resistance up to 70 °C on polished Aluminium alloy 6082 by tuning the deposition parameters. Coatings with a tungsten adhesion layer showed better corrosion resistance than those with a chromium adhesion layer. In situ, accelerated stress testing of single cells was performed using uncoated and coated Al6082 bipolar plates. Both coatings resulted in improved fuel cell performance compared to uncoated aluminium when used on the cathode side of the fuel cell.Keywords
Funding Information
- Innovate UK (10028605)
This publication has 31 references indexed in Scilit:
- Protective coatings for metal bipolar plates of fuel cells: A reviewInternational Journal of Hydrogen Energy, 2022
- Investigation of corrosion properties with Ni–P/TiNO coating on aluminum alloy bipolar plates in proton exchange membrane fuel cellInternational Journal of Hydrogen Energy, 2022
- Structure and mechanical properties of reactive and non-reactive sputter deposited WC based coatingsJournal of Alloys and Compounds, 2021
- Studies on the physical and electrochemical properties of Ni-P coating on commercial aluminum as bipolar plate in PEMFCFuel, 2019
- Durability and characterization studies of chromium carbide coated aluminum fuel cell stackInternational Journal of Hydrogen Energy, 2016
- Carbon coating for corrosion protection of SS-316L and AA-6061 as bipolar plates of PEM fuel cellsJournal of Alloys and Compounds, 2014
- An investigation of coated aluminium bipolar plates for PEMFCApplied Energy, 2012
- Ni–P and Ni–Co–P coated aluminum alloy 5251 substrates as metallic bipolar plates for PEM fuel cell applicationsInternational Journal of Hydrogen Energy, 2012
- Conductive amorphous carbon-coated 316L stainless steel as bipolar plates in polymer electrolyte membrane fuel cellsInternational Journal of Hydrogen Energy, 2009
- New electroplated aluminum bipolar plate for PEM fuel cellJournal of Power Sources, 2008