Effects of inductor patterns on temperature and deformation behavior of ship hull plate by induction heating
Authors:
- 25 October 2018
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 232 (23) , 4371-4389
Abstract
This paper mainly investigated the effects of different inductor patterns on thermal forming behavior of ship hull plate by moving induction heating. Alternately-coupled electromagnetic-thermal analysis procedure considering temperature-dependent material properties was firstly implemented at each moving step of inductor, followed with uncoupled thermal-mechanical transient analysis to obtain corresponding thermal deformation. Then temperature distribution, dimensions (breadth b and depth h) of heat-affected zone, and deformation obtained from codirectional current-carrying inductor with no gap and opposite-direction current-carrying inductor with gap were compared, respectively. And effects of heating directions and distance T2 of ODIG were also analyzed. It turns out that codirectional current-carrying inductor with no gap can generate much larger transverse shrinkage at 1.8–2.5 mm/s than opposite-direction current-carrying inductor with gap, otherwise smaller at 3.2–4.0 mm/s, likewise larger temperature gradient at 1.8–4.0 mm/s and thus larger bending angular deformation. Besides, heating direction “Out” can generate larger deformation than “In” and deformation for opposite-direction current-carrying inductor with gap can be effectively improved through adjusting distance T2 until 13 mm. These indicate that adopting appropriate inductor patterns, heating direction and distance T2 of opposite-direction current-carrying inductor with gap can significantly improve thermal forming behavior.Keywords
Funding Information
- Research Project of State Key Laboratory of Ocean Engineering, Development of Intelligent Machining Robot for Large Curvature Ship Plate (Project No. GKZD10010)
- National Key Basic Research and Development Program (Project No. 2013CB036103)
This publication has 20 references indexed in Scilit:
- An approach to triangular induction heating in final precision forming of thick steel platesJournal of Materials Processing Technology, 2014
- Prediction of deformation of steel plate with forced displacement and initial curvature in a forming process with high frequency induction heatingInternational Journal of Precision Engineering and Manufacturing, 2013
- Deformation behavior of SS400 Thick plate by high-frequency-induction-heating-based line heatingMetals and Materials International, 2013
- Coupled electro-magneto-thermal model for induction heating process of a moving billetInternational Journal of Thermal Sciences, 2012
- Analysis of triangle heating technique using high frequency induction heating in forming process of steel plateInternational Journal of Precision Engineering and Manufacturing, 2012
- STUDY ON TEMPERATURE FIELD INDUCED IN HIGH FREQUENCY INDUCTION HEATINGActa Metallurgica Sinica (English Letters), 2006
- Prediction of steel plate deformation due to triangle heating using the inherent strain methodJournal of Marine Science and Technology, 2005
- A computer aided finite element/experimental analysis of induction heating process of steelComputers in Industry, 1996
- Synergy of Laser Material Processing and Metal FormingCIRP Annals, 1994
- The Mechanisms of Laser FormingCIRP Annals, 1993