Fabrication of porous ceramic composites with improved compressive strength from coal fly ash
Authors:
- 1 May 2011
- journal article
- Published by SAGE Publications in Advances in Applied Ceramics: Structural, Functional and Bioceramics
- Vol. 110 (4) , 244-250
Abstract
A freeze–gel casting method has been proposed to fabricate porous mullite–alumina composite with controlled ‘designer’ pore structure and improved compressive strength. In this work, a tertiary butyl alcohol–coal fly ash slurry system with appropriate addition of Al2O3 was used. Unidirectional aligned macropore channels were developed by controlling the solidification direction of the tertiary butyl alcohol solvent. Simultaneously, microsized pores formed in the walls of the pore channels; consequently, the inner section of the walls of the pore channels exhibited a more porous structure than the outer walls. The compressive strength of the sintered porous composite increased as the porosity decreased, i.e. the low porosity gave a high compressive strength. After sintering at 1500°C with 40 wt-% solid loading, the mullite–alumina composite with a porosity of 61·2% exhibited a compressive strength of ∼64·3 MPa.Keywords
This publication has 13 references indexed in Scilit:
- Fabrication of HA/TCP scaffolds with a graded and porous structure using a camphene-based freeze-casting methodActa Biomaterialia, 2009
- Properties of Microstructure‐Controllable Porous Yttria‐Stabilized Ziroconia Ceramics Fabricated by Freeze CastingInternational Journal of Applied Ceramic Technology, 2008
- Ceramics With Ultra‐Low Density Fabricated by Gelcasting: An Unconventional ViewJournal of the American Ceramic Society, 2007
- Ceramics with Special Porous Structures Fabricated by Freeze‐Gelcasting: Using tert‐Butyl Alcohol as a TemplateJournal of the American Ceramic Society, 2007
- Freezing Dilute Ceramic/Camphene Slurry for Ultra‐High Porosity Ceramics with Completely Interconnected Pore NetworksJournal of the American Ceramic Society, 2006
- Processing Routes to Macroporous Ceramics: A ReviewJournal of the American Ceramic Society, 2006
- Cellular Ceramics2005
- Preparation of Short Mullite Fibers from Kaolin via the Addition of Foaming AgentsJournal of the American Ceramic Society, 2001
- Synthesis of Porous Ceramics with Complex Pore Structure by Freeze‐Dry ProcessingJournal of the American Ceramic Society, 2001
- Investigation of superstructures in mullite by high resolution electron microscopy and electron diffractionPhysics and Chemistry of Minerals, 1983