Development of Vertical Wind Turbine Blades Using 4D Printing of Composites
Authors:
Open Access
- 13 March 2026
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 47 (12) , 10966-10975
Abstract
This paper presents the procedure to make vertical wind turbine blades using the technique of 4D printing of composites (4DPC). The blades are made using carbon/epoxy composite materials with a fiber volume fraction of about 60%. Even though the blade has a 3D shape with curvatures, it is made using only a flat mold. The procedure can provide time and cost savings due to the fact that molds of complex curvature are not necessary. At the same time, the material is strong, stiff, and light, giving further savings in weight and subsequent benefits in handling. Testing on wind turbines with original aluminum blades and with composite blades shows that the wind turbines with composite blades run at higher speeds.Keywords
This publication has 30 references indexed in Scilit:
- A review of 4D printing – Technologies, shape shifting, smart polymer based materials, and biomedical applicationsAdvanced Industrial and Engineering Polymer Research, 2024
- Conical shells made by 4D printing of compositesComposites Part A: Applied Science and Manufacturing, 2023
- Development of a new flexible wing concept for Unmanned Aerial Vehicle using corrugated core made by 4D printing of compositesComposite Structures, 2022
- Development of omega stiffeners using 4D printing of compositesComposite Structures, 2021
- 4D-printed bi-material composite laminate for manufacturing reversible shape-change structuresComposites Part B: Engineering, 2021
- A comprehensive review of the photopolymerization of ceramic resins used in stereolithographyAdditive Manufacturing, 2020
- Highly stretchable hydrogels for sensitive pressure sensor and programmable surface patterning by thermal bubble inkjet technologyJournal of Applied Polymer Science, 2020
- Bioinspired Electro‐Thermo‐Hygro Reversible Shape‐Changing Materials by 4D PrintingAdvanced Functional Materials, 2019
- Development of composite springs using 4D printing methodComposite Structures, 2019
- Wind tunnel experiments of a newly developed two-bladed Savonius-style wind turbineApplied Energy, 2015