Characterization of Corn Starch Films Reinforced with CaCO3 Nanoparticles
Authors:
Open Access
- 4 September 2014
- journal article
- research article
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 9 (9) , e106727
Abstract
The characterization of corn starch (CS) films impregnated with CaCO3 nanoparticles was investigated. Criteria such as morphology, crystallinity, water vapor permeability (WVP), opacity, and mechanical properties were the focus of the investigation. It was found that the CaCO3 contents had significant effects on the tensile properties of the nanocomposite films. The addition of CaCO3 nanoparticles to the CS films significantly increased tensile strength from 1.40 to 2.24 MPa, elongation from 79.21 to 118.98%, and Young’s modulus from 1.82 to 2.41 MPa. The incorporation of CaCO3 nanoparticles increased the opacity of films, lowered the degree of WVP and film solubility value compared to those of the CS films. The results of scanning electron microscopy (SEM) showed that with the increase of CaCO3 nanoparticles content in starch films, the roughness of the films increased, and pores or cavities were found on the surface of the films, while small cracks were observed in the structures of the fractured surfaces. X-ray diffraction showed that the addition of nanoparticles increased the peaks in the intensity of films.Keywords
This publication has 25 references indexed in Scilit:
- Thermoplastic starch films reinforced with talc nanoparticlesCarbohydrate Polymers, 2013
- Tensile and water barrier properties of cassava starch composite films reinforced by synthetic zeolite and beidelliteJournal of Food Engineering, 2013
- Properties of thermoplastic starch from cassava bagasse and cassava starch and their blends with poly (lactic acid)Industrial Crops and Products, 2012
- Biodegradable packages development from starch based heat sealable filmsJournal of Food Engineering, 2011
- Physicochemical characterization of chemically modified corn starches related to rheological behavior, retrogradation and film forming capacityJournal of Food Engineering, 2010
- Novel sources of edible films and coatingsStewart Postharvest Review, 2010
- Effect of cellulose fibers addition on the mechanical properties and water vapor barrier of starch-based filmsFood Hydrocolloids, 2009
- Film forming capacity of chemically modified corn starchesCarbohydrate Polymers, 2008
- Physical and mechanical properties of thermoplastic starch/montmorillonite nanocomposite filmsCarbohydrate Polymers, 2008
- Starch films reinforced with mineral clayCarbohydrate Polymers, 2003