Synthesis of Calcium Silicate Hydrate from Coal Gangue for Cr(VI) and Cu(II) Removal from Aqueous Solution
Open Access
Abstract
Both the accumulation of coal gangue and potentially toxic elements in aqueous solution have caused biological damage to the surrounding ecosystem of the Huainan coal mining field. In this study, coal gangue was used to synthesize calcium silicate hydrate (C-S-H) to remove Cr(VI) and Cu(II)from aqueous solutions and aqueous solution. The optimum parameters for C-S-H synthesis were 700 °C for 1 h and a Ca/Si molar ratio of 1.0. Quantitative sorption analysis was done at variable temperature, C-S-H dosages, solution pH, initial concentrations of metals, and reaction time. The solution pH was precisely controlled by a pH meter. The adsorption temperature was controlled by a thermostatic gas bath oscillator. The error of solution temperature was controlled at ± 0.3, compared with the adsorption temperature. For Cr(VI) and Cu(II), the optimum initial concentration, temperature, and reaction time were 200 mg/L, 40 °C and 90 min, pH 2 and 0.1 g C-S-H for Cr(VI), pH 6 and 0.07 g C-S-H for Cu(II), respectively. The maximum adsorption capacities of Cr(VI) and Cu(II) were 68.03 and 70.42 mg·g−1, respectively. Furthermore, the concentrations of Cu(II) and Cr(VI) in aqueous solution could meet the surface water quality standards in China. The adsorption mechanism of Cu(II) and Cr(VI) onto C-S-H were reduction, electrostatic interaction, chelation interaction, and surface complexation. It was found that C-S-H is an environmentally friendly adsorbent for effective removal of metals from aqueous solution through different mechanisms.Keywords
Funding Information
- National Key Research and Development Program of China (2016YFC0201600)
- Anhui Provincial Key Research and Development Plan (201903a07020011 and 202004b11020016)
- National Natural Science Foundation of China (No. 41672144, 41702166 and 41772035)
This publication has 49 references indexed in Scilit:
- Removal of anionic dye Congo red from aqueous solution by raw pine and acid-treated pine cone powder as adsorbent: Equilibrium, thermodynamic, kinetics, mechanism and process designWater Research, 2012
- Managing trace elements in Portland cement – Part II: Comparison of two methods to incorporate Zn in a cementCement and Concrete Composites, 2011
- Adsorption characteristics of natural zeolites as solid adsorbents for phenol removal from aqueous solutions: Kinetics, mechanism, and thermodynamics studiesChemical Engineering Journal, 2011
- Density Functional Modeling of the Local Structure of Kaolinite Subjected to Thermal DehydroxylationThe Journal of Physical Chemistry A, 2010
- Comparison of surface properties between kaolin and metakaolin in concentrated lime solutionsJournal of Colloid and Interface Science, 2009
- Influence of degree of dehydroxylation on the pozzolanic activity of metakaolinApplied Clay Science, 2009
- Biosorption of hexavalent chromium by raw and acid-treated green alga Oedogonium hatei from aqueous solutionsJournal of Hazardous Materials, 2009
- Influence of metakaolin on the properties of mortar and concrete: A reviewApplied Clay Science, 2009
- The structure and stoichiometry of C-S-HCement and Concrete Research, 2004
- A New Concept of the Transformation Sequence of Kaolinite to MulliteNature, 1958