Removal of Phosphorus from Liquid Iron-Alloys with Ca-CaF2 Melt
Authors:
Open Access
- 1 January 1977
- journal article
- Published by Iron and Steel Institute of Japan in Tetsu-to-Hagane
- Vol. 63 (13) , 2172-2180
Abstract
Removal of Phosphorus from Liquid Iron-Alloys with Ca-CaF2 Melt Naoki TOKUMITSU, Kazu-umi HARASHIMA, and Yasushi NAKAMURA Synopsis: ESR experiments were made to study the dephosphorization of S45C, SUS304, and 25% Cr steels with Ca-CaF2melt used as an electroflux. The reaction was found to occur mainly at the electrode-tip/Ca-CaF2melt interface. The distribution of P between the liquid steel and the Ca solution was determined only by the Ca content of CaF2 melt, irrespective of the remelting rate, the flux weight, and the P content of electrode studied. For SUS304 and 25% Cr steels the distribution ratio was given as follows: (%P)/[%P]=4(%Ca)(%Ca)2 For S45C steel the ratio appeared to be larger than that expected from the above equation. The experimental results indicate that the dephosphorization reaction is nearly completed during the remelting process. The observed dependence of the distribution ratio on the Ca content was proved to be consistent with a model for Ca-CaF2 solution in which an equilibrium for the reaction, 2Ca+++2e=Ca2++, is assumed.Keywords
This publication has 5 references indexed in Scilit:
- Mixing in Liquid Metal Pool during Electroslag RemeltingTransactions of the Iron and Steel Institute of Japan, 1974
- Solubilities of calcium in liquid calcium chloride in equilibrium with calcium-copper alloysThe Journal of Physical Chemistry, 1970
- Activities in the liquid Fe-Cr-C(sat), Fe-P-C(sat), and Fe-Cr-P systems at 1600°cMetallurgical Transactions, 1970
- The Electrical Conductivity of Solutions of Metals in Their Molten Halides. VIII. Alkaline Earth Metal Systems1The Journal of Physical Chemistry, 1966
- MIXTURES OF METALS WITH MOLTEN SALTS1963