Dynamic reflectance changes in high-purity zirconium when it is shocked from the α to ω phase
Open Access
- 13 November 2018
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 124 (18) , 185105
Abstract
Flash lamp-illuminated integrating spheres have been used to measure the dynamic reflectance at the interface between a shocked metal target and a window maintaining the shock stress. In conjunction with radiance measurements, this method was recently used to study the pressure versus temperature phase boundary of the beta phase to body-centered-tetragonal transition of tin at around 13 GPa and, in separate experiments, to show a relationship between the reflectance and the phase fraction. We have used this technique to measure the ratio, R, of the dynamic reflectance relative to the ambient value for a high-purity zirconium sample attached to a sapphire window to study the alpha to omega phase transition. Nine experiments cover the range of stress, σ, from 4 to 16 GPa at six wavelengths from 500 to 1550 nm. The two phases in zirconium differ in volume by 6 GPa. Our results show that the relative reflectance decreases upon initial shock in the alpha state but increases as the material transforms to its omega state. The slope dR/dσ changes the sign around the phase transition. For shocks below 6 GPa, dR/dσ < 0, and for σ above 10 GPa, dR/dσ > 0. In the stress region between 6 and 10 GPa, dR/dσ varies somewhat, perhaps due to the band structure or because the transition is incomplete there.Keywords
This publication has 18 references indexed in Scilit:
- Influence of impurities on the α to ω phase transition in zirconium under dynamic loading conditionsJournal of Applied Physics, 2009
- Compact system for high-speed velocimetry using heterodyne techniquesReview of Scientific Instruments, 2006
- Phase changes and the equation of state of ZrModelling and Simulation in Materials Science and Engineering, 2005
- The influence of interstitial oxygen and peak pressure on the shock loading behavior of zirconiumActa Materialia, 2005
- Temperature measurements of shock heated materials using multispectral pyrometry: Application to bismuthShock Waves, 1999
- Formulas for Fabry–Perot velocimeter performance using both stripe and multifrequency techniquesApplied Optics, 1991
- Velocimetry of fast surfaces using Fabry–Perot interferometryReview of Scientific Instruments, 1988
- Velocity sensing interferometer (VISAR) modificationReview of Scientific Instruments, 1979
- Shock wave study of the α ⇄ ε phase transition in ironJournal of Applied Physics, 1974
- Laser interferometer for measuring high velocities of any reflecting surfaceJournal of Applied Physics, 1972