Isolated Winding-Coupled Bidirectional ZVS Converter With PWM Plus Phase-Shift (PPS) Control Strategy
Authors:
- 25 July 2011
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 26 (12) , 3560-3570
Abstract
A novel winding-coupled bidirectional dc/dc converter with zero-voltage-switching (ZVS) performance is proposed in this paper. In the low-voltage side, the parallel configuration is employed to share the large current and reduce the current ripple. In the high-voltage side, the series structure is adopted to sustain the high bus voltage and achieve large voltage ratio conversion. There are only two coupled inductors in the proposed interleaved bidirectional converter and their secondary windings are in series to serve as winding-coupled inductors. Furthermore, the two winding-coupled inductors can be integrated into a magnetic core to reduce the passive component numbers and improve the power density. Moreover, ZVS soft-switching operation is implemented for all the power switches to minimize the switching losses by introducing the active clamp scheme. In addition, the pulsewidth modulation plus phase-shift control strategy is employed to reduce the power MOSFET peak current and diminish the circulating losses. The duty cycle is applied to balance the voltages of both sides. The phase-shift angle is introduced to realize the power flow regulation. This decoupling control strategy is advantageous for bidirectional dc/dc conversion to realize high efficiency. Finally, a 1-kW prototype is built to verify the effectiveness of the proposed circuit.Keywords
This publication has 28 references indexed in Scilit:
- Isolated Bidirectional Full-Bridge DC–DC Converter With a Flyback SnubberIEEE Transactions on Power Electronics, 2010
- Experimental Comparison of Traditional Phase-Shift, Dual-Phase-Shift, and Model-Based Control of Isolated Bidirectional DC–DC ConvertersIEEE Transactions on Power Electronics, 2009
- Analysis and Design of High-Frequency Isolated Dual-Bridge Series Resonant DC/DC ConverterIEEE Transactions on Power Electronics, 2009
- A Soft-Switching Scheme for an Isolated DC/DC Converter With Pulsating DC Output for a Three-Phase High-Frequency-Link PWM ConverterIEEE Transactions on Power Electronics, 2009
- Hybrid Modulation for Dual-Active-Bridge Bidirectional Converter With Extended Power Range for Ultracapacitor ApplicationIEEE Transactions on Industry Applications, 2009
- A Zero-Voltage-Switching Bidirectional DC–DC Converter With State Analysis and Soft-Switching-Oriented Design ConsiderationIEEE Transactions on Industrial Electronics, 2009
- Voltage Balancing of a 320-V, 12-F Electric Double-Layer Capacitor Bank Combined With a 10-kW Bidirectional Isolated DC--DC ConverterIEEE Transactions on Power Electronics, 2008
- Line-Interactive UPS Using a Fuel Cell as the Primary SourceIEEE Transactions on Industrial Electronics, 2008
- A bidirectional DC–DC converter for fuel cell electric vehicle driving systemIEEE Transactions on Power Electronics, 2006
- A Novel Soft-Commutating Isolated Boost Full-Bridge ZVS-PWM DC–DC Converter for Bidirectional High Power ApplicationsIEEE Transactions on Power Electronics, 2006