Effect of Y 2 O 3 on microstructural characteristics and wear resistance of cobalt‐based composite coatings produced on TA15 titanium alloy surface by laser cladding
- 18 November 2014
- journal article
- research article
- Published by Wiley in Surface and Interface Analysis
- Vol. 47 (2) , 239-244
Abstract
The effects of Y 2 O 3 on the microstructure, phase composition of the coatings, microhardness and wear resistance of cobalt‐based composite coatings prepared by laser cladding were investigated. The TA15 titanium alloy was selected as substrate which the cobalt‐based composite powder with different content of Y 2 O 3 was cladded on. The microstructure of the coatings was observed by scanning electron microscope (SEM) and metallurgical microscope. The phase structure of the coatings was determined by X‐ray diffraction (XRD), and the microhardness and wear resistance of the coatings were measured by hardness tester and wear testing machine. The results show that the rare earth oxide Y 2 O 3 can refine and purify the microstructure of the coatings, reduce the porosities and cracks and improve compactness of the coatings. Moreover the addition of Y 2 O 3 improves the microhardness of the coatings and reduces the friction coefficient, thus improving the wear property of the coatings. And the wear resistance of the coating with Y 2 O 3 has improved about 50 times; the highest value of microhardness in the coating is HV1181.1. And 0.8 wt% content of Y 2 O 3 in the coating is the best choice for improving the microhardness and wear resistance of the coating. It is feasible to improve the microstructure and tribological properties of laser cladding coatings by adding of Y 2 O 3 . Copyright © 2014 John Wiley & Sons, Ltd.Keywords
This publication has 14 references indexed in Scilit:
- Synthesis of Fe–Ni–B–Si–Nb amorphous and crystalline composite coatings by laser cladding and remeltingSurface and Coatings Technology, 2011
- Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V alloySurface and Coatings Technology, 2011
- Influence of process parameters on thickness and wear resistance of rare earth modified chromium coatings on P110 steel synthesized by pack cementationJournal of Rare Earths, 2011
- Microstructure characteristics of Ti3Al/TiC ceramic layer deposited by laser claddingInternational Journal of Refractory Metals and Hard Materials, 2011
- A study on wear resistance and microcrack of the Ti3Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti–6Al–4V alloyApplied Surface Science, 2010
- A new theoretical model for high power laser clad TiC/NiCrBSiC composite coatings on Ti6Al4V alloysOptics and Lasers in Engineering, 2010
- Effect of Y2O3 addition on microstructure of Ni-based alloy + Y2O3/substrate laser cladJournal of Materials Processing Technology, 2008
- Microstructural characteristics of laser clad coatings with rare earth metal elementsJournal of Materials Processing Technology, 2003
- Rare earth elements modification of laser-clad nickel-based alloy coatingsApplied Surface Science, 2001
- Microstructure and corrosion resistance of laser clad coatings with rare earth elementsCorrosion Science, 2001