Tough and adhesive nanostructured calcium phosphate thin films deposited by the pulsed plasma deposition method
Authors:
- Marco BoiMBMarco Boi
- Michele BianchiMBMichele Bianchi
- Alessandro GambardellaAGAlessandro Gambardella
- Fabiola LiscioFLFabiola Liscio
- Saulius KaciulisSaulius Kaciulis
- Andrea VisaniAVAndrea Visani
- Marianna BarbalinardoMBMarianna Barbalinardo
- Francesco ValleFVFrancesco Valle
- Michele IafiscoMichele Iafisco
- Silvia MilitaSMSilvia Milita
- 9 September 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (96) , 78561-78571
Abstract
Calcium phosphate (CaP) coatings are commonly employed to improve the bioactivity of bone and dental metal implants, due to the chemical–physical similarity with the mineral phase of bone, envisaged to enhance the integration with the surrounding bone tissue. However, growing concerns about the use of commercial thick CaP coatings, mainly related to their weak mechanical properties, poor interface strength and micro-structural inhomogeneity, are leading the investigation of new and alternative CaP deposition techniques. In this study the feasibility to deposit tough and well adherent CaP thin films by a novel Pulsed Plasma Deposition (PPD) method on Ti alloy was investigated. Microstructural, chemical and morphological properties of the coatings as well as the nano-mechanical properties and their adhesion to the Ti-alloy substrate were extensively characterized. In vitro biocompatibility was also preliminary assessed evaluating the adhesion and proliferation of primary mouse osteoblasts. As-deposited CaP films were amorphous and exhibited dense and uniform surface composed of sub-micrometric aggregated globular particles. Noteworthy, mechanical properties of as-deposited films were comparable to the ones of commercial plasma-sprayed coatings despite the significant difference of thickness (a few hundred nanometers vs. tens of micrometers). After the thermal annealing of the as deposited films at 600 °C for 1 h in air, a transformation from amorphous calcium phosphate to crystalline hydroxyapatite (HA) phase occurred. The mechanical properties as well as the adhesion to substrate of the annealed films strongly improved respect to those of the as deposited films, displaying interesting high hardness, elastic strain to failure and plastic deformation resistance values. Finally, biological in vitro tests indicated good biocompatibility of both as-deposited and annealed films, with this latter showing better cells adhesion and proliferation compared to the former.Keywords
This publication has 44 references indexed in Scilit:
- Electrostatic Spray Deposition of Biomimetic Nanocrystalline Apatite Coatings onto TitaniumAdvanced Engineering Materials, 2011
- Effects of hydroxyapatite coating on survival of an uncemented femoral stemActa Orthopaedica, 2011
- Survival of Hard-on-Hard Bearings in Total Hip Arthroplasty: A Systematic ReviewClinical Orthopaedics and Related Research, 2010
- In vitro dissolution and mechanical behavior of c-axis preferentially oriented hydroxyapatite thin films fabricated by pulsed laser depositionActa Biomaterialia, 2010
- Hydrothermal crystallization effect on the improvement of erosion resistance and reliability of plasma-sprayed hydroxyapatite coatingsThin Solid Films, 2009
- Bone growth enhancement in vivo on press‐fit titanium alloy implants with acid etched microtextureJournal of Biomedical Materials Research Part A, 2008
- Relation between Strength, Fracture Toughness, and Critical Frontal Process Zone Size in CeramicsMATERIALS TRANSACTIONS, 2006
- Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 2004
- Surface analysis of biocompatible coatings on titaniumJournal of Electron Spectroscopy and Related Phenomena, 1998
- Pulsed laser deposition of hydroxylapatite thin films on Ti‐6Al‐4VJournal of Applied Biomaterials, 1992