An Experimental Investigation of the Heat Transfer Performance of an Oscillating Heat Pipe With Copper Oxide (CuO) Microstructure Layer on the Inner Surface
Authors:
- 6 June 2013
- journal article
- Published by Wiley in Journal of Heat Transfer
- Vol. 135 (7) , 074504
Abstract
This paper presents an experimental investigation of whether heat transfer performance in an oscillating heat pipe (OHP) would improve if the inner surface of the heat pipe was coated with a layer of copper oxide (CuO). The OHP had six turns and three sections, i.e., evaporator, condenser, and adiabatic section with lengths of 40 mm, 64 mm, and 51 mm, respectively. The cleaned copper tubing was chemically treated with a chemical solution and heated in a furnace. A microstructure layer of CuO was formed in the inner surface of the OHP with K2S2O8 and KOH. The working fluid in this study was water with filling ratios ranging from 40% to 70%. The experimental results show that the CuO microstructure layer is superhydrophilic and can enhance the OHP heat transfer performance. The investigation results in a new way to enhance the heat transfer performance of an OHP.Keywords
This publication has 10 references indexed in Scilit:
- Hydrophobic Surface Effect on Heat Transfer Performance in an Oscillating Heat PipeJournal of Heat Transfer, 2012
- Thermal performance comparison of oscillating heat pipes with SiO2/water and Al2O3/water nanofluidsInternational Journal of Thermal Sciences, 2011
- Particle size effect on heat transfer performance in an oscillating heat pipeExperimental Thermal and Fluid Science, 2011
- Particle shape effect on heat transfer performance in an oscillating heat pipeDiscover Nano, 2011
- Study on a Pulsating Heat Pipe With Self-Rewetting FluidJournal of Electronic Packaging, 2010
- Thermal performance of an oscillating heat pipe with Al2O3–water nanofluidsInternational Communications in Heat and Mass Transfer, 2010
- Visual Observation of Oscillating Heat Pipes Using Neutron RadiographyJournal of Thermophysics and Heat Transfer, 2008
- An Experimental Investigation of Heat Transport Capability in a Nanofluid Oscillating Heat PipeJournal of Heat Transfer, 2006
- Closed loop pulsating heat pipes Part B: visualization and semi-empirical modelingApplied Thermal Engineering, 2003
- Correlation to predict heat transfer characteristics of a closed-end oscillating heat pipe at normal operating conditionApplied Thermal Engineering, 2003