Calibration of Horizontal Acoustic Doppler Current profilers by three dimensional CFD simulations
Authors:
Open Access
- 1 January 2015
- journal article
- research article
- Published by Taylor & Francis in Engineering Applications of Computational Fluid Mechanics
- Vol. 9 (1) , 41-49
Abstract
This study presents a calibration method of horizontal acoustic Doppler current profilers (H-ADCP), based on 3D Computational Fluid Dynamics (CFD) simulations. Rigidly mounted H-ACCPs are currently used to continuously monitor water discharges. In this study three instruments were employed at separate sites in an unlined rock-blasted hydro power tunnel. The total discharge in the tunnel was predicted by fitting numerical and measured velocity profiles. The accuracy of the method was evaluated by comparing discharge predictions to results obtained by thermodynamic efficiency measurements. This study shows that 3D CFD simulations not only can be used to accurately calibrate H-ADCP, but also to assess the flow conditions at the locations of installation. An average error of 2% was obtained for the tunnel stretch that possessed the most uniform flow. However, the precision of the discharge estimates were confined by the CFD code's capability to correctly resolve the flow pattern.Keywords
This publication has 18 references indexed in Scilit:
- CFD-Modelling and Validation of Free Surface Flow During Spilling of Reservoir in Down-Scale ModelEngineering Applications of Computational Fluid Mechanics, 2013
- Operation challenges for fast-growing China's hydropower systems and respondence to energy saving and emission reductionRenewable and Sustainable Energy Reviews, 2012
- Three-Dimensional Rans Modeling of Flow Around Circular Piers using Nested GridsEngineering Applications of Computational Fluid Mechanics, 2012
- Closed-Form Solution for Flow Field in Curved Channels in Comparison with Experimental and Numerical Analyses and Artificial Neural NetworkEngineering Applications of Computational Fluid Mechanics, 2012
- 3D Numerical Modelling of Flow Around Skewed Bridge CrossingEngineering Applications of Computational Fluid Mechanics, 2012
- An Efficient Method to Describe the Geometry and the Roughness of an Existing Unlined Hydro Power TunnelEnergy Procedia, 2012
- Numerical Modeling of Flow Over Trapezoidal Broad-Crested WeirEngineering Applications of Computational Fluid Mechanics, 2011
- Model Evaluation Guidelines for Systematic Quantification of Accuracy in Watershed SimulationsTransactions of the ASABE, 2007
- A three-dimensional pollutant transport model in orthogonal curvilinear and sigma coordinate system for Pearl river estuaryInternational Journal of Environment and Pollution, 2004
- 3D Numerical Model for Pearl River EstuaryJournal of Hydraulic Engineering, 2001