Unraveling the Influence of Thermal Drawing Parameters on the Microstructure and Thermo–Mechanical Properties of Multimaterial Fibers
Open Access
Abstract
Multimaterial thermally drawn fibers are becoming important building blocks in several foreseen applications in surgical probes, protective gears, or medical textiles. Here, the influence of the thermal drawing parameters on the degree of polymer chain orientation, the related thermal shrinkage behavior, and the mechanical properties of the final fibers is investigated via thermo–mechanical testing and small‐ and wide‐angle X‐ray scattering (SAXS and WAXS) analyses. This study on polyetherimide fibers reveals that the drawing stress, which depends on the drawing speed and temperature, controls the thermal shrinkage behavior and mechanical properties. Furthermore, SAXS and WAXS analyses show that the degree of chain orientation increases with drawing stresses below 8 MPa and then saturates, which correlates with the amount of observed shrinkage. The use of this process‐dependent polymer chain alignment to tune the mechanical and shrinkage properties of the fibers is highlighted and controlled bending multimaterial fibers made of two polymethyl methacrylates having different molecular weights are developed. Finally, a heat treatment procedure is proposed to relax the chain alignment and increase the dimensional stability of devices such as temperature sensors. This deeper understanding can serve as a guide for the processing of complex fibers requiring specific mechanical properties or enhanced thermal stability.Keywords
Funding Information
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (2000021_146871)
- Competence Centre for Materials Science and Technology
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (173012)
This publication has 40 references indexed in Scilit:
- Salient Features in Uniaxial Extension of Polymer Melts and Solutions: Progressive Loss of Entanglements, Yielding, Non-Gaussian Stretching, and RuptureMacromolecules, 2011
- CONTROL OF DIMENSIONAL STABILITY AND DEGRADATION RATE IN ELECTROSPUN COMPOSITE SCAFFOLDS COMPOSED OF POLY(D,L-LACTIDE-co-GLYCOLIDE) AND POLY(ε-CAPROLACTONE)Chinese Journal of Polymer Science, 2008
- Automatic measurement of the absolute CTE of thin polymer samples. II. Effect of chain orientation on thermal expansion of drawn polymer filmsJournal of Applied Polymer Science, 2006
- DetectorsOptics and Photonics News, 2004
- Thermal shrinkage stress in high‐speed‐spun, high molecular weight poly(ethylene terephthalate) filamentsJournal of Polymer Science Part B: Polymer Physics, 2001
- Effect of processing history on shrinkage stress in axially oriented poly(ethylene terephthalate) fibres and filmsPolymer, 1994
- Shrinkage and related relaxation of internal stresses in oriented glassy polymersPolymer, 1988
- Microfibril dimensions from small-angle X-ray scatteringJournal of Applied Crystallography, 1979
- Glass transition elevation by polymer entanglementsPolymer, 1978
- Stress birefringence in amorphous polymers under nonisothermal conditionsJournal of Polymer Science: Polymer Physics Edition, 1977