Electron cyclotron resonance plasma etching of InP in CH4/H2/Ar
Authors:
- 9 April 1990
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 56 (15) , 1424-1426
Abstract
Plasma etching of InP in a microwave (2.45 GHz) electron cyclotron resonance (ECR) CH4/H2/Ar discharge has been investigated as a function of additional radio frequency (rf, 13.56 MHz) self‐biasing of the sample. The etch rate of InP in a 1 mTorr, 250 W CH4/H2/Ar (5/15/7) ECR discharge increases linearly with applied rf bias, from 50 Å min−1 at 0 V to 350 Å min−1 at 200 V. Etching under ECR conditions alone yields smooth surface morphologies, while additional rf biasing of the discharge leads to In droplets remaining on the surface. This appears to be a result of preferential removal of P by the high atomic hydrogen density in the discharge. The room‐temperature photoluminescence intensity from InP is reduced by approximately an order of magnitude after ECR etching, but is restored after removal of ∼20 Å from the surface by wet chemical etching. Gold Schottky contacts on InP samples etched under ECR conditions only yield barrier heights of 0.48 eV and ideality factors of 1.1, essentially identical to those on wet‐etched control samples. ECR etching performed with an additional 100 V rf bias yields diodes with barrier heights of 0.44 eV and ideality factors of 1.6. Removal of ∼20 Å of the surface on these samples restores the values to those obtained on the control material.Keywords
This publication has 15 references indexed in Scilit:
- Reactive ion etching induced damage in GaAs and AlGaAs using C2H6/H2/Ar or CCl2F2/O2 gas mixturesJournal of Applied Physics, 1989
- Dry etching induced damage on vertical sidewalls of GaAs channelsJournal of Vacuum Science & Technology B, 1988
- Reactive ion etched InP/GaInAs multiple quantum well rib waveguides grown by solid source MBEElectronics Letters, 1988
- Reactive ion etching damage to GaAs layers with etch stopsJournal of Vacuum Science & Technology B, 1988
- Electrical damage induced by ion beam etching of GaAsJournal of Vacuum Science & Technology B, 1988
- Reactive ion etch process with highly controllable GaAs-to-AlGaAs selectivity using SF6 and SiCl4Applied Physics Letters, 1987
- Low-energy ion extraction with small dispersion from an electron cyclotron resonance microwave plasma streamApplied Physics Letters, 1987
- Surface Damage on GaAs Induced by Reactive Ion Etching and Sputter EtchingJournal of the Electrochemical Society, 1986
- Ion beam damage effects during the low energy cleaning of GaAsIEEE Electron Device Letters, 1982
- Microwave Plasma EtchingJapanese Journal of Applied Physics, 1977