Preparation and properties of a graphene reinforced nanocomposite conducting plate
Authors:
- 27 August 2010
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 20 (39) , 8496-8505
Abstract
This study presents a novel nanocomposite conducting plate (CP) reinforced by graphene at a low weight fraction percentage, and compares the properties of this novel nanocomposite CP with those containing various weight fractions of multi-wall carbon nanotubes (MWCNT) (0.2, 0.5, and 1 phr). Adding only 0.2 phr of graphene as reinforcement remarkably enhanced the thermal, mechanical, and electrical properties of the nanocomposite CP. The coefficient of thermal expansion (CTE) of nanocomposite CP below the glass transition temperature (Tg) decreased from 49.7 μm−1 m °C−1 to 26.9 μm−1 m °C−1 and the CTE above Tg decreased from 119.2 μm−1 m°C−1 to 55.2 μm−1 m °C−1 . Thermal conductivity increased from 18.4 W m−1 K−1 to 27.2 W m−1 K−1 . The flexural strength increased from to 28.0 MPa to 49.2 MPa. The in-plane electrical conductivity increased from 155.7 S cm−1 to 286.4 S cm−1. The enhancement percentages of these properties are 47.8%, 75.7%, and 83.9%, respectively, which are much higher than that of the original composite CP. These results indicate that using graphene as reinforcement in the preparation of nanocomposite CP is effective in terms of cost and performance, because of the low cost the raw material, graphite, and the fact that a lower loading of graphene than of MWCNT can yield the same performance. Moreover, this novel multi-functional nanocomposite CP has wide potential for use in proton exchange membrane fuel cells (PEMFCs), direct methanol fuel cells (DMFCs), the dye-sensitized solar cells (DSSCs) counter electrode, and vanadium redox battery (VRB) applications.Keywords
This publication has 75 references indexed in Scilit:
- Preparation and properties of functionalized multiwalled carbon nanotubes/polypropylene nanocomposite bipolar plates for polymer electrolyte membrane fuel cellsJournal of Power Sources, 2010
- A novel carbon-based nanocomposite plate as a counter electrode for dye-sensitized solar cellsComposites Science and Technology, 2009
- Graphite–carbon nanotube composite electrodes for all vanadium redox flow batteryJournal of Power Sources, 2008
- One-step functionalization of carbon nanotubes by free-radical modification for the preparation of nanocomposite bipolar plates in polymer electrolyte membrane fuel cellsJournal of Materials Chemistry, 2008
- The development of economical bipolar plates for fuel cellsJournal of Materials Chemistry, 2006
- Mass production cost of PEM fuel cell by learning curveInternational Journal of Hydrogen Energy, 2004
- Preparation, electrical, mechanical and thermal properties of composite bipolar plate for a fuel cellJournal of Power Sources, 2004
- Technical cost analysis for PEM fuel cellsJournal of Power Sources, 2002
- Bipolar plate materials for solid polymer fuel cellsJournal of Applied Electrochemistry, 2000
- Carbon–polymer composite electrodes for redox cellsJournal of Applied Polymer Science, 1995