Modelling of turbulent lifted jet flames using flamelets:a prioriassessment anda posteriorivalidation
- 4 March 2014
- journal article
- research article
- Published by Taylor & Francis in Combustion Theory and Modelling
- Vol. 18 (2) , 295-329
Abstract
This study focuses on the modelling of turbulent lifted jet flames using flamelets and a presumed Probability Density Function (PDF) approach with interest in both flame lift-off height and flame brush structure. First, flamelet models used to capture contributions from premixed and non-premixed modes of the partially premixed combustion in the lifted jet flame are assessed using a Direct Numerical Simulation (DNS) data for a turbulent lifted hydrogen jet flame. The joint PDFs of mixture fraction Z and progress variable c, including their statistical correlation, are obtained using a copula method, which is also validated using the DNS data. The statistically independent PDFs are found to be generally inadequate to represent the joint PDFs from the DNS data. The effects of Z–c correlation and the contribution from the non-premixed combustion mode on the flame lift-off height are studied systematically by including one effect at a time in the simulations used for a posteriori validation. A simple model including the effects of chemical kinetics and scalar dissipation rate is suggested and used for non-premixed combustion contributions. The results clearly show that both Z–c correlation and non-premixed combustion effects are required in the premixed flamelets approach to get good agreement with the measured flame lift-off heights as a function of jet velocity. The flame brush structure reported in earlier experimental studies is also captured reasonably well for various axial positions. It seems that flame stabilisation is influenced by both premixed and non-premixed combustion modes, and their mutual influences.Keywords
This publication has 66 references indexed in Scilit:
- A Presumed Joint pdf Model for Turbulent Combustion with Varying Equivalence RatioCombustion Science and Technology, 2012
- Flame Stabilization Mechanisms in Lifted FlamesFlow, Turbulence and Combustion, 2011
- Statistical Analysis of Cross Scalar Dissipation Rate Transport in Turbulent Partially Premixed Flames: A Direct Numerical Simulation StudyFlow, Turbulence and Combustion, 2010
- A combustion model for premixed flames with varying stoichiometryProceedings of the Combustion Institute, 2002
- Prediction of lifted, non-premixed turbulent flames using a mixedness-reactedness flamelet model with radiation heat lossCombustion and Flame, 2002
- Investigating the effects of edge flames in liftoff in non-premixed turbulent combustionSymposium (International) on Combustion, 1998
- The mathematical modeling of liftoff and blowoff of turbulent non-premixed methane jet flames at high strain ratesSymposium (International) on Combustion, 1998
- Liftoff characteristics of turbulent jet diffusion flamesAIAA Journal, 1983
- The prediction of laminarization with a two-equation model of turbulenceInternational Journal of Heat and Mass Transfer, 1972
- A Class of Bivariate DistributionsJournal of the American Statistical Association, 1965