Feedforward Interpolation Error Compensation Method for Field Weakening Operation Region of PMSM Drive
Open Access
- 18 September 2019
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 8 (9) , 1052
Abstract
This study proposes a field weakening control method with interpolation error compensation of the look-up table based permanent-magnet synchronous machine (PMSM) method. The look-up table (LUT) based control method has robust control characteristics compared to other control methods that use linear controllers for current reference generation. However, it is impossible to store all current references under all circumstances for torque commands. General LUT based control methods use two input parameters. In order to mitigate the effect of discretely stored data, two-dimensional interpolation is used to linearly interpolate values between discontinuous data. However, because the current trajectories of PMSMs are generally ellipsoidal, an error occurs between the linearly interpolated and controllable current references. This study proposes a method to compensate for this interpolation error using a feedforward controller for rapid compensation. The improvement using the proposed method is verified by experiment and simulation.Keywords
Funding Information
- National Research Foundation of Korea (NRF-2018R1C1B6008895, NRF- 2016R1A6A1A03013567)
This publication has 10 references indexed in Scilit:
- DC-link voltage feedforwarded interpolation error compensation method for field weakening operation region of look-up table based PMSM driveIOP Conference Series: Materials Science and Engineering, 2019
- Current Minimizing Torque Control of the IPMSM Using Ferrari’s MethodIEEE Transactions on Power Electronics, 2013
- High performance controllers for Interior Permanent Magnet Synchronous Machines using look-up tables and curve-fitting methods2013
- Interior permanent magnet synchronous motor control for electric vehicle using look-up table2012
- Field-weakening strategy in condition of DC-link voltage variation using on electric vehicle of IPMSM2011
- Current control method of IPMSM in constant power region for HEV2011
- Torque Feedforward Control Technique for Permanent-Magnet Synchronous MotorsIEEE Transactions on Industrial Electronics, 2010
- Feedforward Flux-Weakening Control of Surface-Mounted Permanent-Magnet Synchronous Motors Accounting for Resistive Voltage DropIEEE Transactions on Industrial Electronics, 2009
- Novel Flux-Weakening Control of an IPMSM for Quasi-Six-Step OperationIEEE Transactions on Industry Applications, 2008
- Field weakening control of interior permanent magnet machine using improved current interpolation technique2006