Application of Multi-Channel Synchronized Dynamic Strain Gauges in Monitoring the Neutral Axis Position and Prestress Loss of Box Girder Bridges
Open Access
Abstract
The aim of this paper was to explore the application of multi-channel synchronized dynamic strain gauges in monitoring the neutral axis (N.A.) position of prestressed concrete box girders. The N.A. position has recently been proposed as an indicator for monitoring the health of bridge structures. Laboratory experiments were conducted on a prestressed T-beam under different prestress level conditions to investigate the correlation between the prestress magnitude and the N.A. position. In the development of the multi-channel synchronized dynamic strain gauges, edge computing was employed to significantly reduce the amount of data transmitted from the sensor nodes on-site. In edge computing, only the dynamic strain response caused by the maximum vehicle load in each minute is transmitted. This approach greatly enhances the monitoring efficiency and enables the realization of on-site non-computer-based monitoring systems. The laboratory test results of the prestressed T-beam showed that the N.A. position tends to move slightly downward as the prestress force increases. In other words, when the prestress force decreases due to loss, the N.A. position exhibits a slight upward movement. This study selected a newly constructed prestressed box girder as the subject for on-site measurement of the N.A. position using multi-channel synchronized dynamic strain gauges shortly after the prestress was applied. The on-site monitoring data indeed revealed a gradual upward movement of the N.A. position. This phenomenon confirmed that soon after the completion of prestressed concrete bridges, there is a gradual loss of prestress due to the significant shrinkage and creep effects of the early-age concrete. The on-site monitoring result aligned with the findings from the laboratory experiments, where the N.A. position was observed to move upward as the prestress decreased.Keywords
Funding Information
- China Engineering Consultants, Inc. (10929)
This publication has 20 references indexed in Scilit:
- Theoretically thermal-varying models of the neutral axis position for local damage detection of bridge girdersEngineering Structures, 2023
- Automatic uncoupling of massive dynamic strains induced by vehicle- and temperature-loads for monitoring of operating bridgesMechanical Systems and Signal Processing, 2022
- Strain monitoring based bridge reliability assessment using parametric Bayesian mixture modelEngineering Structures, 2021
- Influence of damage versus temperature on modal strains and neutral axis positions of beam-like structuresMechanical Systems and Signal Processing, 2019
- Equivalent neutral axis for structural condition assessment using multi-sensor fusionEngineering Structures, 2019
- Environmental effects and output-only model identification of continuous bridge responseKSCE Journal of Civil Engineering, 2015
- Effects of thermal environment on structural frequencies: Part II – A system identification modelEngineering Structures, 2014
- The response of embedded strain sensors in concrete beams subjected to thermal loadingConstruction and Building Materials, 2014
- Neutral axis as damage sensitive featureSmart Materials and Structures, 2013
- Temperature effect on vibration properties of civil structures: a literature review and case studiesJournal of Civil Structural Health Monitoring, 2012