Liquid Fuel Property Effects on Lean Blowout in an Aircraft Relevant Combustor
- 11 January 2019
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (7)
Abstract
This paper describes results from an experimental study on influences of liquid fuel properties on lean blowout (LBO) limits in an aero-type combustor. In particular, this work aimed to elucidate the roles of fuel chemical and physical properties on LBO. Fuel chemical properties stem from the fuel chemical structure, thus governing chemical kinetic behaviors of oxidation characteristics (e.g., ignition or extinction time scales) and others (e.g., fuel thermal stability or sooting tendencies). Fuel physical properties affect the spray characteristics (e.g., atomization and evaporation rates). Eighteen different fuels, with a wide range of physical and chemical fuel properties, were tested. Several of these fuels were custom blends, developed to break intercorrelations between various physical and chemical properties. Fuel physical and chemical property effects were further separated by measuring blowout boundaries at three air inlet temperatures between 300 and 550 K, enabling variation in vaporization rates. The condition at 300 K corresponds to a temperature that is less than the flash point for most of the studied fuels and, therefore, forming a flammable mixture was challenging in this regime. The opposite scenario occurred at 550 K, where fuel droplets evaporate quickly, and the temperature actually exceeds the auto-ignition temperatures of some of the fuels. At 300 K, the data suggest that blowout is controlled by fuel physical properties, as a correlation is found between the blowout boundaries and the fuel vaporization temperature. At 450 and 550 K, the blowout boundaries correlated well with the derived cetane number (DCN), related to the global chemical kinetic reactivity.Keywords
Funding Information
- Air Force Office of Scientific Research (FA9550-16-1-0442)
- Federal Aviation Administration (13-C-AJFE-GIT-008)
This publication has 36 references indexed in Scilit:
- Influence of Single-Component Fuels on Gas-Turbine Model Combustor Lean BlowoutJournal of Propulsion and Power, 2018
- Reconstruction of chemical structure of real fuel by surrogate formulation based upon combustion property targetsCombustion and Flame, 2017
- Predicting the global combustion behaviors of petroleum-derived and alternative jet fuels by simple fuel property measurementsFuel, 2016
- Strain Characteristics Near the Flame Attachment Point in a Swirling FlowCombustion Science and Technology, 2011
- Dynamics of Premixed H2/CH4 Flames Under Near Blowoff ConditionsJournal of Engineering for Gas Turbines and Power, 2010
- Lean blowoff of bluff body stabilized flames: Scaling and dynamicsProgress in Energy and Combustion Science, 2009
- Characterization of Fuel Composition Effects in H2∕CO∕CH4 Mixtures Upon Lean BlowoutJournal of Engineering for Gas Turbines and Power, 2006
- Fuel Effects on Gas Turbine Combustion—Ignition, Stability, and Combustion EfficiencyJournal of Engineering for Gas Turbines and Power, 1985
- Semi-empirical correlations for gas turbine emissions, ignition, and flame stabilizationProgress in Energy and Combustion Science, 1980
- Flame Stability in Bluff Body Recirculation ZonesIndustrial & Engineering Chemistry, 1953