Microstructural analysis of stir zone of Al alloy produced by friction stir spot welding
Authors:
- M. FujimotoMFM. Fujimoto
- S. KogaSKS. Koga
- N. AbeNAN. Abe
- Y. S. SatoYSY. S. Sato
- H. KokawaHKH. Kokawa
- 1 October 2008
- journal article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 13 (7) , 663-670
Abstract
Friction stir spot welding (FSSW), which was recently developed as a spot joining technique, has been applied to a lap joint of Al alloy 6061 sheets, 1 mm in thickness, to clarify its microstructural features of the joint. A nugget shaped stir zone having finer grain size was observed around the exit hole of the probe. Crystallographic texture analyses using EBSD method suggested that the material flow occurred along the rotating direction of the FSSW tool in the wide region including the stir zone. In the periphery of the nugget shaped stir zone, which was characterised by finer grain size than the stir zone interior, no inclusions or precipitates were found on the SEM scale. A softened region was formed around the joint centre, which could be explained as resulting from dissolution and/or growth of the strengthening precipitates due to thermal cycle of FSSW.Keywords
This publication has 21 references indexed in Scilit:
- Development of Friction Spot JoiningWelding in the World, 2005
- Development of grain structure during friction stir weldingScripta Materialia, 2004
- Basal plane texture and flow pattern in friction stir weld of a magnesium alloyMetallurgical and Materials Transactions A, 2003
- Characterization of a friction-stir-welded aluminum alloy 6013Metallurgical and Materials Transactions B, 2002
- Heterogeneity of crystallographic texture in friction stir welds of aluminumMetallurgical and Materials Transactions A, 2001
- Microtexture in the friction-stir weld of an aluminum alloyMetallurgical and Materials Transactions A, 2001
- Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloysScripta Materialia, 2000
- Precipitation sequence in friction stir weld of 6063 aluminum during agingMetallurgical and Materials Transactions A, 1999
- HRTEM observation of metastable phase in Al-Mg2Si alloys.Journal of Japan Institute of Light Metals, 1997
- Aluminum-magnesium-silicon alloys.Journal of Japan Institute of Light Metals, 1988