Comparative Evaluation of Oxygen-Assisted and Compressed-Air Plasma Cutting of Low-Carbon Steel
Open Access
Abstract
Air plasma cutting technology is widely used for high-speed profiling of electrically conductive materials. The cut quality of surface and thermal effects is highly influenced by gas composition and process parameters. This study aims to systematically optimise and comparatively evaluate conventional compressed-air plasma cutting and an oxygen-assisted compressed-air plasma cutting process for 10 mm thick C-20 carbon steel plates. The investigation was conducted in two sequential stages using statistical Design of Experiments (DoE). First, a full-factorial design comprising 20 experiments was performed using compressed air to establish baseline process parameters and optimum operating ranges. Subsequently, a Central Composite Design (CCD) based on Response Surface Methodology (RSM) was employed for 20 additional experiments to model and compare pure compressed air with an oxygen-compressed air mixture. Cut quality was evaluated in terms of kerf width, dross height, bevel angle, surface roughness, maximum cutting temperature, and heat-affected zone (HAZ) length. The results demonstrate that the addition of oxygen improves plasma arc characteristics and produces substantial reductions in kerf width from 2.3 to 2.1 mm, dross height from 0.3 to 0.2 mm, bevel angle from 1.6 to 1.4 Radian, Avg.surface roughness from 1.2 to 0.2 µm, Max.surface roughness from 8.2 to 1.6 µm, Max. surface temperature from 1719.3 to 1607.8 °C and HAZ from 38 to 23.2 µm compared with conventional compressed-air cutting. Furthermore, microstructural analysis of the cut surfaces revealed a significant reduction in HAZ length when the oxygen-assisted gas mixture was employed. Overall, the findings demonstrate the potential of oxygen-assisted compressed-air plasma cutting to improve cutting efficiency and surface quality while reducing thermal effects, providing practical guidance for the optimisation of plasma-assisted manufacturing processes.Keywords
This publication has 30 references indexed in Scilit:
- Investigation and optimization of plasma arc cutting process parameters for AISI 304 by integrating principal component analysis and composite desirability methodJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2023
- Sub-nanometer finishing of polycrystalline tin by inductively coupled plasma-assisted cuttingFrontiers of Mechanical Engineering, 2023
- The effect of air plasma cutting on the quality, structural transformations and changes in the chemical composition of structural steelArchives of Civil and Mechanical Engineering, 2023
- Analysis on grain growth of SS316L induced by plasma cutting process using probabilistic FEM with experimental verificationThe International Journal of Advanced Manufacturing Technology, 2022
- Experimental Investigation of Plasma Cutting Two Separate Thin Steel Sheets Simultaneously and Parameters Optimisation Using Taguchi ApproachJournal of Manufacturing Processes, 2021
- Machining performance optimization during plasma arc cutting of AISI D2 steel: application of FIS, nonlinear regression and JAYA optimization algorithmJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2018
- Application of Grey Taguchi-based response surface methodology (GT-RSM) for optimizing the plasma arc cutting parameters of 304L stainless steelThe International Journal of Advanced Manufacturing Technology, 2015
- Effect of process parameters on cut quality of stainless steel of plasma arc cutting using hybrid approachThe International Journal of Advanced Manufacturing Technology, 2014
- Optimising plasma cut-edge properties for improving the durability of bridge structuresInternational Journal of Steel Structures, 2011
- Taguchi-based Six Sigma approach to optimize plasma cutting process: an industrial case studyThe International Journal of Advanced Manufacturing Technology, 2008