Numerical Model of Sedimentation/Thickening with Inertial Effects
Authors:
- 1 September 1999
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 125 (9) , 792-806
Abstract
A numerical model of gravity sedimentation and thickening was developed from the governing two-phase flow equations for the liquid and solid phases. The inertial and gravity terms in the solid and liquid momentum equations were retained in the gravity sedimentation and thickening model. An implicit, space-staggered finite-difference algorithm was developed for the resulting coupled partial differential equations. Constitutive relationships describing the physical properties of the slurry were required to solve the numerical model. These constitutive properties describing the relationship between effective stress and porosity and between permeability and porosity were determined experimentally and by model calibration. The model was calibrated and verified using the data of dynamic porosity profiles of gravity sedimentation and thickening of kaolin suspensions in distilled water.Keywords
This publication has 13 references indexed in Scilit:
- Modeling Flow and Mixing in Sedimentation TanksJournal of Hydraulic Engineering, 1990
- Modeling and simulation of compressive gravity thickening of activated sludgeJournal of Environmental Science and Health, Part A, 1989
- Kynch theory and compression zonesAIChE Journal, 1983
- Revision of kynch sedimentation theoryAIChE Journal, 1981
- Sedimentation of flocculent suspensions: State of the artAIChE Journal, 1979
- A stable and accurate convective modelling procedure based on quadratic upstream interpolationComputer Methods in Applied Mechanics and Engineering, 1979
- A study of inertial effects in sedimentationChemical Engineering Science, 1976
- ANALYSIS OF SETTLSNG OF THICK SLURRIES DUE TO CONSOLIDATIONJOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1970
- A theory of sedimentationTransactions of the Faraday Society, 1952
- Some Factors Influencing SedimentationIndustrial & Engineering Chemistry, 1926