Coupled Electromechanical Characterization of Self-Sensing, Graphene-Modified Cement for Wellbore Construction
Authors:
- Ali EttehadiAEAli Ettehadi
- Omar A. HamdyOHOmar A. Hamdy
- Loic Bethel DjeLDLoic Bethel Dje
- Jonny RuqvistJRJonny Ruqvist
- Hunjoo P. LeeHLHunjoo P. Lee
- Mileva RadonjicMRMileva Radonjic
Preprint
- 4 June 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Wellbore cement is the primary barrier material used to maintain zonal isolation and long-term integrity in subsurface energy systems. However, conventional cement systems function as passive barriers and provide limited capability for continuous integrity monitoring after placement. This study investigates graphene nanoplatelet (GNP)-modified API Class H cement as a multifunctional material capable of providing both structural integrity and self-sensing functionality under saturated conditions representative of subsurface environments.Cement formulations containing 0.3 wt%, 0.5 wt%, and 1.0 wt% GNP were prepared using powder- and liquid-dispersed graphene systems. Electrical characterization was performed from 1 Hz to 10 kHz under fully saturated conditions. Coupled UCS and in-situ electrical resistance measurements were conducted during deformation and failure. Post-failure microstructures were examined using scanning electron microscopy.The results showed that electrical conductivity enhancement depended strongly on graphene concentration and conductive-network development. The 0.3 wt% GNP system remained below the effective conductive percolation threshold, whereas the 0.5 wt% and 1.0 wt% systems exhibited lower resistance and improved conductive behavior. Coupled electromechanical testing revealed that neat cement displayed a dominant single-stage electrical response during failure, while GNP-modified systems exhibited delayed failure, progressive post-peak degradation, and multi-stage electrical evolution associated with conductive-network disruption and reconfiguration. The 0.5 wt% powder-dispersed GNP system achieved the highest compressive strength and electromechanical sensitivity, whereas the 0.5 wt% liquid-dispersed GNP system produced smoother and more distributed sensing behavior. These findings demonstrate the potential of graphene-modified cement as a self-sensing barrier material for geothermal, carbon storage, and wellbore integrity applications.Keywords
This publication has 29 references indexed in Scilit:
- Controlling the Formation of Electroactive Graphene‐Based Cementitious Composites: Towards Structural Health Monitoring of Civil StructuresChemistry – A European Journal, 2023
- Characterization and piezo-resistivity studies on graphite-enabled self-sensing cementitious composites with high stress and strain sensitivityCement and Concrete Composites, 2023
- Graphene nanoplatelets reinforced cement as a solution to leaky wellbores reinforcing weak points in hydrated Portland cement with graphene nanoparticles improves mechanical and chemical durability of wellbore cementsCement and Concrete Composites, 2022
- Leakage risk assessment of a CO2 storage site: A reviewEarth-Science Reviews, 2021
- A review of intrinsic self-sensing cementitious composites and prospects for their application in transport infrastructuresConstruction and Building Materials, 2021
- Graphene nanoplatelets as an effective additive to tune the microstructures and piezoresistive properties of cement-based compositesConstruction and Building Materials, 2019
- Correlation between damage evolution and resistivity reaction of concrete in-filled with graphene nanoplateletsConstruction and Building Materials, 2019
- High‐Performance Graphene‐Based Cementitious CompositesAdvanced Science, 2019
- Microstructure and mechanical performance of graphene reinforced cementitious compositesComposites Part A: Applied Science and Manufacturing, 2018
- Sensing of Damage Mechanisms in Fiber‐Reinforced Composites under Cyclic Loading using Carbon NanotubesAdvanced Functional Materials, 2008