Covalently functionalized graphene oxide and quaternized polysulfone nanocomposite membranes for fuel cells
Authors:
- 11 July 2016
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (75) , 71305-71310
Abstract
In this work, covalently crosslinked nanocomposite hydroxide conducting membranes were developed on the basis of functionalized graphene oxide and quaternized polysulfone. Fourier transform infrared attenuated total reflection spectroscopy and transmission electron microscopy were employed to characterise the structure and morphology. The properties of AEMs including water uptake, swelling ratio, mechanical properties and ionic conductivity were measured. The resultant nanocomposite membrane containing 2% functionalized graphene oxide is tough and flexible, demonstrating a water uptake of 19.44% and an ionic conductivity of 1.27 × 10−2 S cm−1 at 60 °C, a tensile strength of 14.90 MPa and a moderate elongation rate at break. Furthermore, it still maintained its flexibility and toughness after treatment in 1 M NaOH solution for 744 h at 50 °C.Keywords
Funding Information
- National Natural Science Foundation of China (51503161)
This publication has 28 references indexed in Scilit:
- Poly(2,6-dimethyl-1,4-phenylene oxide)-b-poly(vinylbenzyltrimethylammonium) Diblock Copolymers for Highly Conductive Anion Exchange MembranesMacromolecules, 2015
- Quaternized poly (styrene-co-vinylbenzyl chloride) anion exchange membranes for alkaline water electrolysersJournal of Power Sources, 2015
- Anion-exchange membranes in electrochemical energy systemsEnergy & Environmental Science, 2014
- Anion exchange membranes by bromination of benzylmethyl-containing poly(arylene ether)s for alkaline membrane fuel cellsRSC Advances, 2014
- Synthesis and properties of a novel side-chain-type hydroxide exchange membrane for direct methanol fuel cells (DMFCs)Journal of Power Sources, 2012
- Recent Development of Polymer Electrolyte Membranes for Fuel CellsChemical Reviews, 2012
- Preparation of alkaline anion exchange polymer membrane from methylated melamine grafted poly(vinylbenzyl chloride) and its fuel cell performanceJournal of Materials Chemistry, 2011
- Characterization of an anionic-exchange membranes for direct methanol alkaline fuel cellsInternational Journal of Hydrogen Energy, 2010
- Quaternized poly(methyl methacrylate-co-butyl acrylate-co-vinylbenzyl chloride) membrane for alkaline fuel cellsJournal of Power Sources, 2010
- Anionic polysulfone ionomers and membranes containing fluorenyl groups for anionic fuel cellsJournal of Power Sources, 2009