Effect of Tension Strain Level on Reinforcement Corrosion
Authors:
- 1 March 2018
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 30 (3)
Abstract
Reinforcement corrosion is a general problem about the reliability and durability of concrete structures. A lot of research about the issue of reinforcement corrosion has been done; however, it has focused primarily on reinforcement under zero strain. To discuss how tension strain affects reinforcement corrosion, a salt spray test was conducted on reinforcement specimens. The degree of corrosion in reinforcement and the mechanical properties of the tested reinforcement were obtained. The strength of reinforcement decreased with the degree of corrosion, and the decrease of elongation was more significant. Strain level had a nonnegligible influence on the degree of corrosion. The reinforcement corroded more when it was kept under a higher tension strain. During the same corrosion period, the corrosion degree in a specimen under a tension strain of was 1.22 times that of an unstrained specimen. The coefficient representing the effect of strain on corrosion was defined. It was also found that the influence of tension strain on mechanical properties of tested reinforcement is irregular.
Keywords
This publication has 26 references indexed in Scilit:
- Chloride-induced corrosion of steel reinforcement – Mechanical performance and pit depth analysisConstruction and Building Materials, 2013
- Impact of corrosion on mechanical properties of steel embedded in 27-year-old corroded reinforced concrete beamsMaterials and Structures, 2012
- Tensile and fatigue behavior of corroded rebarsConstruction and Building Materials, 2012
- Chloride-Induced Corrosion of Steel in Cracked OPC and PPC Concretes: Experimental StudyJournal of Materials in Civil Engineering, 2011
- Effect of stress corrosion cracking on stress–strain response of steel wires used in prestressed concrete beamsCorrosion Science, 2009
- Consequences of steel corrosion on the ductility properties of reinforcement barConstruction and Building Materials, 2008
- Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environmentCement and Concrete Research, 2007
- Residual capacity of corroded reinforcing barsMagazine of Concrete Research, 2005
- Effect of degree of corrosion on the properties of reinforcing steel barsConstruction and Building Materials, 2001
- Stress-corrosion crackingJournal of Physics and Chemistry of Solids, 1987