Impact of the wet spinning parameters on the alpaca‐based polyacrylonitrile composite fibers: Morphology and enhanced mechanical properties study
- 19 March 2020
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (41)
Abstract
The study examined the effect of different wet spinning parameters (e.g., total solid content, coagulation bath concentration, drawing, and stretching) on the morphology and mechanical properties of the wet spun alpaca/polyacrylonitrile (PAN) composite fibers. The alpaca/PAN composite fibers were wet spun using 10, 20, and 30% of alpaca particles along with the PAN polymer. The shear‐thinning or non‐Newtonian flow behavior was observed among the dope solutions with different solid content. The cross‐sectional fiber morphology showed the bean‐shaped characteristic for the control PAN fibers, whereas the alpaca/PAN composite fibers exhibited almost circular shape. “Cavity healing” was observed, where noticeable voids and porous areas were demolished in the cross section of the composite fibers, by changing the total solid content and coagulation bath concentration. Although the control PAN fibers exhibited the highest tenacity with lower fiber diameter, the alpaca/PAN composite fibers showed a gradual deterioration in tenacity while adding alpaca particles into the PAN polymeric matrix. Nevertheless, due to the increment in the total solid content, higher draw ratio, and stretching of the fibers, the tenacity, molecular orientation, and the crystallinity of the composite fibers were increased.Keywords
This publication has 54 references indexed in Scilit:
- Composites based on polypropylene and short wool fibresComposites Part A: Applied Science and Manufacturing, 2013
- Ageing effect of plasma‐treated woolThe Journal of the Textile Institute, 2011
- A new elastoviscoplastic model based on the Herschel–Bulkley viscoplastic modelJournal of Non-Newtonian Fluid Mechanics, 2009
- Effect of Coagulation Bath DMSO Concentration on the Structure and Properties of Polyacrylonitrile (PAN) Nascent Fibers during Wet-SpinningJournal of Macromolecular Science, Part B, 2008
- Effect of DMSO/H2O coagulation bath on the structure and property of polyacrylonitrile fibers during wet‐spinningJournal of Applied Polymer Science, 2007
- Effects of different coagulation conditions on polyacrylonitrile fibers wet spun in a system of dimethylsulphoxide and waterJournal of Applied Polymer Science, 2007
- Preparation and properties of keratin–poly(vinyl alcohol) blend fiberJournal of Applied Polymer Science, 2003
- Effect of coagulation conditions on properties of poly(acrylonitrile–carboxylic acid) fibersJournal of Applied Polymer Science, 2003
- Control of cross-section shape for polyacrylonitrile fibre during wet-spinningJournal of Materials Science Letters, 1991
- Effect of Fiber-Forming Conditions on the Microstructure of Acrylic FiberTextile Research Journal, 1964