Experimental investigation on the pullout behaviour of geosynthetics embedded in a granite residual soil
- 6 October 2015
- journal article
- research article
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- Vol. 20 (9) , 1147-1180
Abstract
Geosynthetics, including geogrids and geotextiles, have been extensively used for stabilisation and soil reinforcement in several geotechnical structures, such as foundations, abutments, walls and slopes. In these applications, soil–geosynthetic interaction plays a determinant role. This paper describes an experimental study carried out using a large-scale pullout test apparatus, aiming to investigate the pullout behaviour of different geosynthetics embedded in a granite residual soil. The study involved two geogrids (one biaxial and the other uniaxial), one geocomposite reinforcement (high-strength geotextile) and one geotextile. The soil was compacted to different relative densities. Test results have revealed that soil–geosynthetic interaction under pullout loading conditions is highly influenced by the geosynthetic properties and soil density. Regardless of soil density, the biaxial geogrid exhibited higher pullout resistance than the other geosynthetics. At maximum pullout force, the deformation along the length of the geotextiles was considerably more pronounced than that along the geogrids. For the conditions adopted in this study, the soil–geosynthetic pullout interaction coefficients ranged from .25 to .52. In general, the values of the scale effect correction factor obtained for the geotextiles were slightly lower than the value recommended by the Federal Highway Administration in the absence of test data.Keywords
Funding Information
- Portuguese Foundation for Science and Technology (Individual Doctoral Grant SFRH/BD/72886/2010, Research Project PTDC/ECM-GEO/0622/2012, Research Project PTDC/ECM/100975/2008)
This publication has 39 references indexed in Scilit:
- Direct shear behaviour of residual soil–geosynthetic interfaces – influence of soil moisture content, soil density and geosynthetic typeGeosynthetics International, 2015
- Influence of matric suction on geotextile reinforcement-marginal soil interface strengthGeotextiles and Geomembranes, 2014
- Pullout tests conducted on clay reinforced with geogrid encapsulated in thin layers of sandGeotextiles and Geomembranes, 2011
- Effect of Progressive Failure on Measured Shear Strength of Geomembrane/GCL InterfaceJournal of Geotechnical and Geoenvironmental Engineering, 2008
- Influence of longitudinal and transverse members on geogrid pullout behavior during deformationGeotextiles and Geomembranes, 2001
- Interaction of Foundry Sands with GeosyntheticsJournal of Geotechnical and Geoenvironmental Engineering, 2001
- Geotextile friction mobilization during field pullout testGeotextiles and Geomembranes, 1998
- Pullout Interaction Mechanism of Geogrid Strip ReinforcementGeosynthetics International, 1995
- Pull-out resistance of geogrid reinforcementsGeotextiles and Geomembranes, 1993
- Comparison of Short-Term and Long-Term Pullout Testing of Geogrid Reinforcements1993