Effect of material volume conductivity on surface charges accumulation on spacers under dc electro-thermal coupling stress
Authors:
- 10 August 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 25 (4) , 1211-1220
Abstract
The modification of insulating materials is regarded as an important way to improve the insulation performance of DC spacers. Many simulations have been carried out to guide the development of insulating materials. However, the impacts of temperature on surface charge accumulation and electric field distributions are neglected in many simulations. Since the conductivities are strongly impacted by temperature, the thermal stresses should be considered in the simulations of charge accumulation. To solve these problems, a coupled electro-thermal field simulation model of charge accumulation under DC stress is proposed in this paper. Then, a DC spacer model is introduced as an example, and the parameters in the simulation are shown. Based on the simulation model, the effects of the spacer volume conductivity on the distribution of the surface charge, the saturation time of charge accumulation and the distribution of the electric field along the spacer are investigated. In addition, the influencing mechanism is explained. The results indicate that the volume conductivity of the insulating material should be decreased by two orders of magnitude from the existing AC materials to reduce the surface charge accumulation. With the reduced volume conductivity, 1) the peak value of the charge density on the upper surface decreases 52.9%, and that of lower surface decreases 51.0%; 2) the peak value of the tangential component of the electric field strength along the cone-type spacer in DC-GIL decreases by 12.2%; and 3) the duration of the capacitive-resistive field transition increases by 38.5-fold. The simulation method and advice on the material volume conductivity can be referenced in the DC space design.Keywords
This publication has 17 references indexed in Scilit:
- Compact gas-insulated systems for high voltage direct current transmission: Basic design2016
- Designing epoxy insulators in SF6-filled DC-GIL with simulations of ionic conduction and surface chargingIEEE Transactions on Dielectrics and Electrical Insulation, 2015
- Theoretical investigation of HVDC disc spacer charging in SF6 gas insulated systemsIEEE Transactions on Dielectrics and Electrical Insulation, 2012
- Steady-state heating of gas insulated busbars2012
- Providing all global energy with wind, water, and solar power, Part II: Reliability, system and transmission costs, and policiesEnergy Policy, 2011
- Dielectric strength coordination and generalized spacer design rules for HVAC/DC SF/sub 6/ gas insulated systemsIEEE Transactions on Dielectrics and Electrical Insulation, 2004
- Enhanced Field Calculation for HVDC GIS2001
- Development of insulation structure and enhancement of insulation reliability of 500 kV DC GISIEEE Transactions on Power Delivery, 1997
- Mechanism and effect of DC charge accumulation on SF/sub 6/ gas insulated spacersIEEE Transactions on Power Delivery, 1989
- Inhomogeneous field breakdown in GIS-the prediction of breakdown probabilities and voltages. II. Ion density and statistical time lagIEEE Transactions on Power Delivery, 1988