In Situ Metal Organic Framework (ZIF-8) and Mechanofusion-Assisted MWCNT Coating of LiFePO4/C Composite Material for Lithium-Ion Batteries
Authors:
- Priyatrisha MathurPMPriyatrisha Mathur
- Jeng-Ywan ShihJSJeng-Ywan Shih
- Ying-Jeng James LiYLYing-Jeng James Li
- Tai-Feng HungTai-Feng Hung
- Balamurugan ThirumalrajBTBalamurugan Thirumalraj
- Sayee Kannan RamarajSRSayee Kannan Ramaraj
- Rajan JoseRajan Jose
- Chelladurai KaruppiahChelladurai Karuppiah
- Chun-Chen YangChun-Chen Yang
Open Access
Abstract
LiFePO4 is one of the industrial, scalable cathode materials in lithium-ion battery production, due to its cost-effectiveness and environmental friendliness. However, the electrochemical performance of LiFePO4 in high current rate operation is still limited, due to its poor ionic- and electron-conductive properties. In this study, a zeolitic imidazolate framework (ZIF-8) and multiwalled carbon nanotubes (MWCNT) modified LiFePO4/C (LFP) composite cathode materials were developed and investigated in detail. The ZIF-8 and MWCNT can be used as ionic- and electron-conductive materials, respectively. The surface modification of LFP by ZIF-8 and MWCNT was carried out through in situ wet chemical and mechanical alloy coating. The as-synthesized materials were scrutinized via various characterization methods, such as XRD, SEM, EDX, etc., to determine the material microstructure, morphology, phase, chemical composition, etc. The uniform and stable spherical morphology of LFP composites was obtained when the ZIF-8 coating was processed by the agitator [A], instead of the magnetic stirrer [MS], condition. It was found that the (optimum of) 2 wt.% ZIF-8@LFP [A]/MWCNT composite cathode material exhibited outstanding improvement in high-rate performance; it maintained the discharge capacities of 125 mAh g−1 at 1C, 110 mAh g−1 at 3C, 103 mAh g−1 at 5C, and 91 mAh g−1 at 10C. Better cycling stability with capacity retention of 75.82% at 1C for 100 cycles, as compared to other electrodes prepared in this study, was also revealed. These excellent results were mainly obtained because of the improvement of lithium-ion transport properties, less polarization effect, and interfacial impedance of the LFP composite cathode materials derived from the synergistic effect of both ZIF-8 and MWCNT coating materials.Keywords
Funding Information
- Ministry of Science and Technology (MOST) of Taiwan from the University-Industry Cooperation Project (MOST 108-3116-F-131-001-CC1, MOST 108-2221-E-131-022-MY3)
- MOST Research Project (MOST 108-3116-F-131-001-CC1, MOST 108-2221-E-131-022-MY3)
This publication has 52 references indexed in Scilit:
- Mesoporous carbon derived from ZIF-8 for improving electrochemical performances of commercial LiFePO 4Materials Letters, 2017
- A simple route to improve rate performance of LiFePO4/reduced graphene oxide composite cathode by adding Mg2+ via mechanical mixingJournal of Power Sources, 2017
- Size Control and Stability Study of Zeolitic Imidazolate Framework-8 to Prepare Mixed Matrix MembraneJournal of Physical Science, 2017
- ZIF-8@MWCNT-derived carbon composite as electrode of high performance for supercapacitorElectrochimica Acta, 2016
- Nitrogen-doped graphene guided formation of monodisperse microspheres of LiFePO4 nanoplates as the positive electrode material of lithium-ion batteriesJournal of Materials Chemistry A, 2016
- Synthesis of hierarchical conductive C/LiFePO 4 /carbon nanotubes composite with less antisite defects for high power lithium-ion batteriesElectrochimica Acta, 2015
- Boron and Nitrogen Codoped Carbon Layers of LiFePO4 Improve the High-Rate Electrochemical Performance for Lithium Ion BatteriesACS Applied Materials & Interfaces, 2015
- A three-dimensional LiFePO4/carbon nanotubes/graphene composite as a cathode material for lithium-ion batteries with superior high-rate performanceJournal of Alloys and Compounds, 2015
- Graphene modified LiFePO4 cathode materials for high power lithium ion batteriesJournal of Materials Chemistry, 2011
- Highly Permeable Zeolite Imidazolate Framework-8 Membranes for CO2/CH4 SeparationJournal of the American Chemical Society, 2009