A SERIAL SOLUTION FOR THE 2-D INVERSE HEAT CONDUCTION PROBLEM FOR ESTIMATING MULTIPLE HEAT FLUX COMPONENTS
Author:
- 1 June 2004
- journal article
- research article
- Published by Taylor & Francis in Numerical Heat Transfer, Part B: Fundamentals
- Vol. 45 (6) , 541-563
Abstract
A serial algorithm for the inverse heat conduction problem (IHCP) has been developed to estimate the individual flux components, one by one, at the unknown boundary, based on the function specification method. The sensitivity coefficient defined in this algorithm brings out the influence of the heat flux components independent of each other. The objective function minimizes the difference in the measured temperature and the contribution of the individual flux component to the thermal field at the sensor location. The serial algorithm developed here could be used with data from both overspecified and underspecified sensors with respect to the number of flux components. The method was tested for delineating independent heat fluxes at the boundary of a two-dimensional solid for both space- and time-varying heat fluxes. Simulated thermal histories obtained from direct solution were used as inputs for the inverse problem for characterizing the new algorithm. Three types of analyses were done on the results of the IHCP, focused on (1) the convergence of error in estimated temperatures at the different sensor locations, (2) overall error in estimated temperatures for the whole domain, and (3) the total heat energy transferred across the boundary. It is shown that the optimum configuration of independent unknown fluxes is given by the one with minimum energy estimates across the boundary, for both cases.Keywords
This publication has 7 references indexed in Scilit:
- Numerical Solution of the General Two-Dimensional Inverse Heat Conduction Problem (IHCP)Journal of Heat Transfer, 1997
- MULTIDIMENSIONAL INVERSE TRANSIENT HEAT CONDUCTION PROBLEMS BY DIRECT SENSITIVITY COEFFICIENT METHOD USING A FINITE-ELEMENT SCHEMENumerical Heat Transfer, Part B: Fundamentals, 1996
- The estimation of surface thermal behavior of the working roll in hot rolling processInternational Journal of Heat and Mass Transfer, 1995
- Inverse Heat Transfer Problems1994
- Determination of interfacial heat transfer coefficients in casting and quenching using a solution technique for inverse problems based on the boundary element methodMetallurgical Transactions B, 1993
- Two-dimensional inverse heat conduction problem of estimating the time-varying strength of a line heat sourceJournal of Applied Physics, 1992
- Heat flux transients at the casting/chill interface during solidification of aluminum base alloysMetallurgical Transactions B, 1991