Bulk Glassy Alloys in (Fe, Co, Ni)-Si-B System
Authors:
- 1 January 2001
- journal article
- Published by Japan Institute of Metals in MATERIALS TRANSACTIONS
- Vol. 42 (6) , 1015-1018
Abstract
Multicomponent Fe75−x−yCoxNiySi8B17 glassy alloys were found to exhibit a distinct glass transition, followed by a supercooled liquid region before crystallization in a rather wide composition range of 7.5 to 45 at%Co and 7.5 to 60 at%Ni. The largest value of the supercooled liquid region defined by the difference between the glass transition temperature (Tg) and crystallization temperature (Tx), ΔTx (=Tx−Tg) was 54 K for Fe30Co30Ni15Si8B17. Furthermore, the high reduced glass transition temperature (Tg⁄Tm) above 0.60 was obtained in the range of 15 to 30 at%Co and 37.5 to 52.5 at%Ni in the series of Fe75−x−yCoxNiySi8B17. The use of Fe30Co30Ni15Si8B17 with a large ΔTx of 54 K and a high Tg⁄Tm of 0.65 enabled us to produce bulk glassy rods with diameters up to 1.2 mm. The Tg, Tx, saturated magnetization (4πIs), and coercive force (Hcj) of the as-cast 1.2 mm rod alloy are 780 K, 834 K, 0.90 T, and 3.0 A/m, respectively. In addition, the cast glassy rod exhibits Young’s modulus of 110 GPa, compressive fracture strength of 2800 MPa and fracture elongation of 1.9%. It is noticed that the thermal stability, magnetic properties and mechanical properties are nearly the same as those for the melt-spun glassy ribbon. The first synthesis of Fe–Si–B base bulk glassy alloys with good soft magnetic properties and high mechanical strength is promising for the future development as a new type of engineering material.Keywords
This publication has 17 references indexed in Scilit:
- Bulk amorphous FC20 (Fe–C–Si) alloys with small amounts of B and their crystallized structure and mechanical propertiesActa Materialia, 2000
- Stabilization of metallic supercooled liquid and bulk amorphous alloysActa Materialia, 2000
- Bulk ferromagnetic glasses prepared by flux melting and water quenchingApplied Physics Letters, 1999
- New Fe-based amorphous alloys with large magnetostriction and wide supercooled liquid region before crystallizationJournal of Applied Physics, 1999
- Ferromagnetic bulk amorphous alloysMetallurgical and Materials Transactions A, 1998
- Bulk amorphous alloys with high mechanical strength and good soft magnetic properties in Fe–TM–B (TM=IV–VIII group transition metal) systemApplied Physics Letters, 1997
- Fe-Based Ferromagnetic Glassy Alloys with Wide Supercooled Liquid RegionMaterials Transactions, JIM, 1995
- Glassy metalsReports on Progress in Physics, 1980
- Structural stability of amorphous metalsMaterials Science and Engineering, 1976
- Amorphous Ferromagnetic Phase in Iron-Carbon-Phosphorus AlloysJournal of Applied Physics, 1967