Paste boriding process: Evaluation of boron mobility on borided steels
Authors:
- 1 May 2007
- journal article
- Published by SAGE Publications in Surface Engineering
- Vol. 23 (3) , 216-222
Abstract
The present study evaluates the boron mobility at the material surface of borided steels AISI 1045 and M2 during the paste boriding process. This surface hardening technique produces two characteristic phases on the material, FeB, Fe2B and a transition zone, denominated diffusion zone, in the layer/substrate interface. The thermochemical treatment was performed at three different temperatures: 1193, 1223, 1273 K and two treatment times: 2 and 6 h for the 1045 steel, and 1223, 1253 and 1273 K with the same treatment times for M2 steel, modifying the boron potentials in equilibrium at the substrates surfaces. By using the mass balance equation, and assuming a linear concentration profile at the interfaces, the new model determined the diffusion coefficients of boron in the phases formed at the surface of the substrates, included the diffusion zone for both steels.Keywords
This publication has 11 references indexed in Scilit:
- Growth kinetics of iron boride layers: Dimensional analysisApplied Surface Science, 2006
- Effect of boron paste thickness on the growth kinetics of polyphase boride coatings during the boriding processApplied Surface Science, 2006
- FeB/FeB phase transformation during SPS pack-boriding: Boride layer growth kineticsActa Materialia, 2005
- Effect of boron paste thickness on the growth kinetics of Fe2B boride layers during the boriding processApplied Surface Science, 2005
- An approach to kinetic study of borided steelsSurface and Coatings Technology, 2005
- Stress analysis of polycrystalline thin films and surface regions by X-ray diffractionJournal of Applied Crystallography, 2005
- Kinetic study of boron diffusion in the paste-boriding processMaterials Science and Engineering: A, 2003
- Thermodynamic optimization of the B–Fe systemJournal of Alloys and Compounds, 2002
- Structural and strength characterization of steels subjected to bonding thermochemical processMaterials Science and Engineering: A, 1997
- Effects of alloying elements on the growth of iron boride coatingsJournal of Materials Science Letters, 1987