Tailoring new bisphenol a ethoxylated shape memory polyurethanes
Authors:
- 28 July 2020
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (2)
Abstract
Shape memory polyurethanes (SMPUs) have generated great attention because of their unique properties. These properties are result of a particular molecular structure consisting of flexible molecular chains with low glass transition temperatures alternating with hard urethane segments. In this field, bisphenol A (BA) has been used for a long time as chain extender due to the good properties of the obtained SPMU materials. Nevertheless, the high toxicity of this compound has caused a high decrease on its use. For this reason, it has been selected a lower toxicity compound, bisphenol A ethoxylate (BAE). In this work, it is described a new SMPUs based on BAE and the influence of the hard segment on the thermo‐mechanical properties and shape memory capacity. For that, both the proportion of the components and the diisocyanate employed (2,4‐toluene diisocyanate (TDI), 4,4′‐methylene bis(phenylisocyanate) (MDI) or a TDI/MDI mixture) have been modified. Then, depending on the molecular architecture achieved, the polyurethanes present different properties, which were studied by different techniques, such as thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and dynamic‐mechanical thermal analysis (DMTA). It has been observed that glass transition temperature (Tg) increases as the hard phase content in the PU samples increases. In addition, Tg‐MDI > Tg‐MDI‐TDI > Tg‐TDI, so it is possible to control the Tg of the material, that is, shape memory transition temperature varying the diisocyanate. Finally, the shape memory capacity of the PUs was evaluated by thermo‐mechanical analysis (TMA). All the synthesized PUs have shown good shape memory effect with fixation ratios up to 80% and recovery ratios close to 100%.Keywords
Funding Information
- Eusko Jaurlaritza
This publication has 28 references indexed in Scilit:
- Synthesis and characterization of PCL–PLLA polyurethane with shape memory behaviorEuropean Polymer Journal, 2013
- Study on the liquefied‐MDI‐based shape memory polyurethanesJournal of Applied Polymer Science, 2007
- Effect of molecular weight on shape memory behavior in polyurethane filmsPolymer International, 2007
- Effect of microphase‐separation promoters on the shape‐memory behavior of polyurethaneJournal of Applied Polymer Science, 2006
- Structure and Mechanical Properties of Shape Memory Polyurethane Based on Hyperbranched PolyestersPolymer Bulletin, 2006
- Effects of moisture on the thermomechanical properties of a polyurethane shape memory polymerPolymer, 2006
- Effects of moisture on the glass transition temperature of polyurethane shape memory polymer filled with nano-carbon powderEuropean Polymer Journal, 2005
- Hydrogen bonding between urethane and urea: band assignment for the carbonyl region of FTi.r. spectrumPolymer, 1996
- Hydrogen bonding in polymers. 4. Infrared temperature studies of a simple polyurethaneMacromolecules, 1986
- Infrared Studies of Segmented Polyurethan Elastomers. I. Hydrogen BondingMacromolecules, 1970