Effect of glass microspheres and fabric weave structure on mechanical performance of hemp/green epoxy composites
- 7 August 2020
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 41 (11) , 4771-4787
Abstract
Despite many advantages, poor mechanical properties are a limiting factor in market growth of natural fiber composites. This work is focused on improvement in the mechanical properties of hemp/green epoxy composites by using four different weave structures and by adding glass microspheres (GMS) to the resin. The reinforcement was fabricated in four different weave designs (matt, satin, hybrid weave A, and hybrid weave B) and four different percentages of GMS (0%, 2%, 3.5%, and 5% on the weight of resin) were also mixed in the green epoxy resin. Four layered composites were fabricated by using vacuum bagging technique. The tensile, flexural and impact tests were conducted. The results showed that the tensile strength of composites with satin weave reinforcement is better than other weaves, due to longer warp thread float and lesser number of intersection points. While, during flexural and pendulum (Charpy) impact testing, matt weave composite showed better results due to its stable and robust structure as compared to the other weave composites. Keeping the weave design constant, the composites with 5% GSM showed better tensile, flexural and impact behavior. Both factors (weave design and GMS percentage) showed a statistically significant effect on the mechanical test results.Keywords
Funding Information
- Higher Education Commission, Pakistan (TDF03 112)
This publication has 32 references indexed in Scilit:
- Composites with hemp reinforcement and bio-based epoxy matrixComposites Part B: Engineering, 2014
- Green composites: An overviewPolymer Composites, 2011
- Green composites: A brief reviewComposites Part A: Applied Science and Manufacturing, 2011
- Sisal/Carbon Fibre Reinforced Hybrid Composites: Tensile, Flexural and Chemical Resistance PropertiesJournal of Polymers and the Environment, 2010
- A study of the mechanical behaviour on fibre reinforced hollow microspheres hybrid compositesComposites Part A: Applied Science and Manufacturing, 2010
- Preparation and properties of hollow glass microsphere-filled epoxy-matrix compositesComposites Science and Technology, 2009
- Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer compositesComposites Part B: Engineering, 2008
- “Green” composites from recycled cellulose and poly(lactic acid): Physico-mechanical and morphological properties evaluationJournal of Materials Science, 2005
- Processing, properties and stability of biodegradable composites based on Mater‐Bi® and cellulose fibresPolymers for Advanced Technologies, 2003
- Effect of processing variables on the mechanical properties of sisal-fiber-reinforced polypropylene compositesComposites Science and Technology, 1999