Using Dynamic Responses of Moving Vehicles to Extract Bridge Modal Properties of a Field Bridge
- 1 June 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 22 (6)
Abstract
The vehicles moving on a bridge excite bridge vibration and can also serve as response receivers because the vehicle dynamic response contains the vibration information of the bridge. A methodology was proposed in a previous study for extracting bridge modal properties, such as natural frequencies and modal shapes, from the vehicle dynamic responses. A specialized test vehicle consisting of a tractor and two following trailers was developed in which the two trailers towed by the tractor moving along the bridge were used as the dynamic response receivers. The responses of one trailer with a time shift were subtracted from the responses of the other to obtain the residual responses that were then processed with fast Fourier transformation (FFT) and short-time Fourier transformation (STFT) to extract the bridge modal properties. In the present paper, field test data of an existing bridge were adopted to verify the proposed methodology. In the vehicle and bridge system, a bridge finite-element (FE) model was updated using the measured accelerations and strains of the bridge; two types of test vehicle models were proposed for use in simulations of the tractor–trailer test system; and the measured surface-roughness profile was used in the numerical simulation. Parametric studies have been conducted to determine the trailer mass and stiffness. Vehicle Model I shows a good capacity for extracting bridge frequencies and the first two modal shapes with a dominant vertical component. However, Vehicle Model II performed better than Vehicle Model I on the extraction of bridge modal shapes that are dominant in lateral bending.Keywords
This publication has 26 references indexed in Scilit:
- Vibration-based damage detection techniques used for health monitoring of structures: a reviewJournal of Civil Structural Health Monitoring, 2016
- Bridge Model Updating Using Response Surface Method and Genetic AlgorithmJournal of Bridge Engineering, 2010
- Identification of Dynamic Vehicular Axle Loads: Demonstration by a Field StudyJournal of Vibration and Control, 2010
- Vibration-based Damage Identification Methods: A Review and Comparative StudyStructural Health Monitoring, 2010
- Damage detection by means of structural damping identificationEngineering Structures, 2008
- Effect of approach span condition on vehicle-induced dynamic response of slab-on-girder road bridgesEngineering Structures, 2007
- Innovative Bridge Condition Assessment from Dynamic Response of a Passing VehicleJournal of Engineering Mechanics, 2006
- Vibration Based Condition Monitoring: A ReviewStructural Health Monitoring, 2004
- Framework of vehicle–bridge–wind dynamic analysisJournal of Wind Engineering and Industrial Aerodynamics, 2004
- A Summary Review of Vibration-Based Damage Identification MethodsThe Shock and Vibration Digest, 1998