Wire Arc Additive Manufacturing of Zinc as a Degradable Metallic Biomaterial
Open Access
- 1 November 2022
- journal article
- research article
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 13 (4) , 212
Abstract
Wire arc additive manufacturing (WAAM) offers a high rate of material deposition among various additive manufacturing techniques with wire as feedstock material but has not been established for zinc alloys. Zn alloys can be used as degradable biomaterials, in contrast to conventional permanent metallic biomaterials. In this work, commercially pure Zn was processed by WAAM to obtain near-dense parts, and the properties obtained through WAAM-processed Zn were compared with wrought (WR) Zn samples. The microstructure and hardness values of the WAAM (41 ± 1 HV0.3) components were found to be similar to those of the WR (35 ± 2 HV0.3) components. Bulk X-ray diffraction texture measurements suggested that WAAM builds exhibit a heavily textured microstructure compared to the WR counterparts, with peak intensities around or in the directions parallel to the build direction (BD). The corrosion rates in simulated body fluid (SBF) were similar for WAAM (0.45 mmpy) and WR (0.3 mmpy) samples. The weight loss measurements in SBF were found to be marginally higher in the WAAM samples compared to the WR counterparts for a duration of up to 21 days. MC3T3-E1 preosteoblasts were found to be healthy and proliferating in the culture medium containing the degradation products from WAAM-Zn in a manner similar to WR-Zn. This work establishes the feasibility of processing Zn by WAAM for use in bioresorbable metallic implants.Keywords
Funding Information
- Science and Engineering Research Board (SERB) of the Government of India (CRG/2021/006468)
This publication has 37 references indexed in Scilit:
- Corrosion behaviour of biodegradable magnesium alloys with hydroxyapatite coatingsSurface and Coatings Technology, 2016
- Evolution of solidification texture during additive manufacturingScientific Reports, 2015
- The control of crystallographic texture in the use of magnesium as a resorbable biomaterialRSC Advances, 2014
- The importance of crystallographic texture in the use of titanium as an orthopedic biomaterialRSC Advances, 2014
- Biodegradable metalsMaterials Science and Engineering: R: Reports, 2014
- Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable StentsAdvanced Materials, 2013
- Long-term biocompatibility of a corrodible peripheral iron stent in the porcine descending aortaBiomaterials, 2006
- A novel approach to temporary stenting: degradable cardiovascular stents produced from corrodible metal---results 6-18 months after implantation into New Zealand white rabbitsHeart, 2001
- Microhardness measurements and the Hall-Petch relationship in an AlMg alloy with submicrometer grain sizeActa Materialia, 1996
- Morbidity at Bone Graft Donor SitesJournal of Orthopaedic Trauma, 1989