Flyer Thickness Effect in the Impact Welding of Aluminum to Steel
Authors:
- 17 September 2018
- journal article
- research article
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 140 (12) , 121002
Abstract
Impact welding is a material processing technology that enables metallurgical bonding in the solid state using a high-speed oblique collision. In this study, the effects of thickness of the flier and collision angle on weld interface morphology were investigated through the vaporizing foil actuator welding (VFAW) of AA1100-O to AISI 1018 Steel. The weld interfaces at various controlled conditions show wavelength increasing with the flier thickness and collision angle. The AA1100-O flier sheets ranged in thickness from 0.127 to 1.016 mm. The velocity of the fliers was directly measured by in situ photon Doppler velocimetry (PDV) and kept nearly constant at 670 m/s. The collision angles were controlled by a customized steel target with a set of various collision angles ranging from 8 deg to 28 deg. A numerical solid mechanics model was optimized for mesh sizes and provided to confirm the wavelength variation. Temperature estimates from the model were also performed to predict local melting and its complex spatial distribution near the weld interface and to compare that prediction to experiments.Keywords
Funding Information
- Division of Civil, Mechanical and Manufacturing Innovation (1537471)
This publication has 17 references indexed in Scilit:
- Impact Welding of Aluminum Alloys 6061 and 5052 by Vaporizing Foil Actuators: Heat-Affected Zone Size and Peel StrengthJournal of Manufacturing Science and Engineering, 2015
- Joining of dissimilar materialsCIRP Annals, 2015
- Accessing collision welding process window for titanium/copper welds with vaporizing foil actuators and grooved targetsJournal of Materials Processing Technology, 2014
- Application of high velocity impact welding at varied different length scalesJournal of Materials Processing Technology, 2011
- Wave formation mechanism in magnetic pulse weldingInternational Journal of Impact Engineering, 2010
- Recent advances in friction-stir welding – Process, weldment structure and propertiesProgress in Materials Science, 2008
- On the transition from a waveless to a wavy interface in explosive weldingMaterials Science and Engineering, 1987
- A discussion of the mechanism of interface wave generation in explosive weldingInternational Journal of Mechanical Sciences, 1974
- Mechanism of bond zone wave formation in explosion-clad metalsMetallurgical Transactions, 1971
- Wave formation in explosive weldingPhilosophical Magazine, 1968