Optimization of machining parameters in turning of Inconel 718 Nickel-base super alloy
Authors:
- 5 February 2020
- journal article
- research article
- Published by EDP Sciences in Mechanics & Industry
- Vol. 21 (2) , 203
Abstract
The high hardness and low thermal diffusivity along with the tremendous strength at high temperatures has rendered the nickel-base super alloys Inconel 718 one of the most difficult to cut material. It possesses a wide range of applications including aerospace as well as chemical and petrochemical industries, and is primarily used in the manufacture of aircraft gas turbines, space vehicles, nuclear power systems, and medical equipment. The present study is mainly focused on the cutting parameters optimization that leads to minimum surface roughness, cutting force and power, specific energy and maximum productivity during the turning of the molded Inconel 718 using a carbide cutting tool. The analysis of variance (ANOVA) method is applied to identify the cutting parameters that most influence the response criteria, and the response surface methodology (RSM) along with the desirability function (DF) approaches are further used to develop the prediction model that addresses the optimization procedure. The different parameters are considered one at a time in order to evaluate the sensitivity of the response (OFAT). This procedure led to identify the nose radius (rε), the feed rate (f), the depth of cut (ap) and the cutting speed (Vc) as the most significant factors on both the surface roughness and the cutting forces. Furthermore, the product (f × ap) and the cutting speed (Vc) were found to be the most dominant factors on the specific energy.Keywords
This publication has 27 references indexed in Scilit:
- On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrationsMeasurement, 2013
- Surface roughness and cutting forces modeling for optimization of machining condition in finish hard turning of AISI 52100 steelJournal of Mechanical Science and Technology, 2012
- Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditionsJournal of Cleaner Production, 2012
- Dry machining of Inconel 718, workpiece surface integrityJournal of Materials Processing Technology, 2011
- Desirability function approach: A review and performance evaluation in adverse conditionsChemometrics and Intelligent Laboratory Systems, 2011
- Study of cutting speed on surface roughness and chip formation when machining nickel-based alloyJournal of Mechanical Science and Technology, 2010
- Study on the machinability characteristics of superalloy Inconel 718 during high speed turningMaterials & Design (1980-2015), 2009
- Usinage de l'acier 100Cr6 trempé par un outil en nitrure de bore cubiqueMécanique & Industries, 2004
- A review of developments towards dry and high speed machining of Inconel 718 alloyInternational Journal of Machine Tools and Manufacture, 2004
- The impact of the tool material and the cutting parameters on surface roughness of supermet 718 nickel superalloyJournal of Materials Processing Technology, 2000