Synthesis of low viscosity, fast UV curing solder resist based on epoxy resin for ink‐jet printing
Authors:
- 4 November 2012
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 129 (1) , 187-192
Abstract
A novel photosensitive low viscosity epoxy resin was synthesized by polyethylene glycol (PEG)‐modified bisphenol‐A epoxy resin (E51). The resin was modified by ethylene glycol, diethylene glycol, and different molecule weights (200,300,400) PEGs to optimize the minimum viscosity. FTIR was used to determine molecule structure. Cationic photoinitiator (UVI‐6976) mixed with modified resin (10 wt %), was utilized to boost the resin curing under UV light. The curing degree was beyond 90% within 40 s and the whole process was monitored by photo‐DSC. The modified resin diluted with ethylene glycol diglycidyl ether, was screen printed onto polyimide and polyethylene terephthalate substrate, and the properties of solder mask were up to China printed circuit association standard. The solder resist also meet all requirements under ink‐jet printing technology as the viscosity is under 60 mPa·s and the curing duration is <1 min. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013Keywords
This publication has 16 references indexed in Scilit:
- Study on properties of a novel photosensitive polysiloxane urethane acrylate for solder maskJournal of Applied Polymer Science, 2010
- UV-curable epoxy systems containing hyperbranched polymers: Kinetics investigation by photo-DSC and real-time FT-IR experimentsPolymer Testing, 2009
- Study of an epoxy system cured with different diamines by differential scanning calorimetryJournal of Applied Polymer Science, 2006
- Dip coating of dielectric and solder mask epoxy polymer layers for build-up purposesApplied Surface Science, 2004
- Printing parameters and ink components affecting ultra-fine-line gravure-offset printing for electronics applicationsJournal of the European Ceramic Society, 2004
- Intrinsic viscosity dependence on polymer molecular weight and fluid temperatureJournal of Applied Polymer Science, 2003
- Prediction of Liquid Formation for Solder and Non-Solder Mask Defined Array PackagesJournal of Electronic Packaging, 1999
- The properties of soldering mask hardened by means of UV using acrylate and methacrylate oligomersJournal of Applied Polymer Science, 1995
- Ionomers in low-polarity solventsPolymer, 1991
- Differential scanning calorimetry of the epoxy cure reactionPolymer Engineering & Science, 1973