Stress Corrosion Cracking Behavior of 300M Steel under Different Heat Treated Conditions
Authors:
- 1 December 1985
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 41 (12) , 688-699
Abstract
The resistance of 300M steel to stress corrosion cracking in a 3.5% NaCl solution was studied as a function of heat treatment. Threshold stress intensity was affected by microstructural features, including prior austenite grain size, amounts of retained austenite, and twins, in addition to grain boundary segregation and fracture toughness of the steel. Crack growth rate was also dependent on microstructure and segregation, but the number of constraint points exerted the maximum influence. The effect of a modified heat treatment, which has been shown to improve all investigated mechanical properties to a significant extent, upon stress corrosion cracking (SCC) properties, was also studied. This heat treatment resulted in significantly higher threshold stress intensity and lower crack growth rate. The results are discussed in terms of microstructure and fractography.Keywords
This publication has 16 references indexed in Scilit:
- Precipitation of ϵ carbide in martensiteMaterials Science and Engineering, 1984
- Hydrogen induced cracking in a low alloy steelMetallurgical Transactions A, 1983
- Tempered martensite embrittlement in phosphorus doped steelsMetallurgical Transactions A, 1979
- Effects of silicon additions and retained austenite on stress corrosion cracking in ultrahigh strength steelsMetallurgical Transactions A, 1978
- Grain Size Effects in Hydrogen-Assisted CrackingMetallurgical Transactions A, 1976
- Effect of heat treatment on the fracture toughness of low alloy steelsEngineering Fracture Mechanics, 1975
- Hydrogen-controlled cracking—An approach to threshold stress intensityMetallurgical Transactions A, 1975
- The cooperative relation between temper embrittlement and hydrogen embrittlement in a high strength steelMetallurgical Transactions, 1974
- The relationship between microstructure and fracture toughness for a low-alloy steelEngineering Fracture Mechanics, 1972
- A note on stress corrosion cracking ratesEngineering Fracture Mechanics, 1971