Microstructure and properties of thick nanocomposite TiN/Si3N4 coatings on Vanadis 23 HS steel

Authors:

Abstract
The microstructure and selected micro-mechanical properties of a 13.4 μm thick nanocomposite TiN/Si3N4 coating deposited onto Vanadis 23 HS steel by a new gas pulsed magnetron sputtering technique were investigated. Scanning and transmission electron microscopy were employed to investigate the detailed microstructure of the coating. It was found that the coating exhibited a fully nanocrystalline structure and was composed of two zones: the outer zone with columnar structure and the inner one with equiaxed, fine columnar structure. Both zones consisted mainly of the δ-TiN nanocrystallites with a small amount of α-Si3N4 and β-Si3N4. In order to increase coating adhesion to the substrate, a graded intermediate layer consisting of three different phases (pure Cr, CrN and Cr2N) was applied. The hardness of the as-deposited TiN/Si3N4 coating was equal to 48 GPa, whereas it was equal to 40 GPa after annealing. The coatings exhibited very good adhesion to the underlying steel substrate.

This publication has 26 references indexed in Scilit: