Intelligent traction control in electric vehicles using an acoustic approach for online estimation of road-tire friction
Authors:
- 1 June 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19310587,p. 1336-1343
Abstract
Torque control of electric motor via current gives the advantage of simplicity and fast response over the complicated torque control of an internal combustion engine which may depend on several parameters ranging from fuel valve angle to gas pedal position and several delay factors. Although traction control system (TCS) for in-wheel-motor (IWM) configuration electric vehicles (EV) has advantages, the performance of the control system, as in most traction control cases, still depends on (1)accurate estimation of road-tire friction characteristics and (2) measurement of slip ratio requiring expensive sensors for obtaining wheel and chassis velocity. The main contribution of this work is design and integration of an acoustic road-type estimation system (ARTE), which significantly increases the robustness and reduces the cost of TCS in IWM configuration EVs. Unlike complicated and expensive sensor units, the system uses a simple data collection set-up including a low-cost cardioid microphone directed to vicinity of road-tire interface. The acoustic data is then reduced to features such as linear predictive, cepstrum and power spectrum coefficients. For robust estimation, only some of these coefficients are selected based on minimum intra-class variance and maximum inter-class distance criteria to train an artificial neural network (ANN) for classification. The road types can be grouped into: Asphalt, gravel, stone and snow with a correct classification rate of 91% for the test data. The predicted road-type is used to select the correct friction characteristic curve (μ-λ) which helps calculating the appropriate torque command for the particular road-tire condition. The system has been evaluated in extensive simulations and the results show that extreme torque values are supressed stabilising the vehicle for several driving scenarios in a more energy-efficient and robust manner compared to previous systems.Keywords
This publication has 9 references indexed in Scilit:
- A Robust Traction Control for Electric Vehicles Without Chassis Velocity2011
- Adaptive Vehicle Speed Control With Input Injections for Longitudinal Motion Independent Road Frictional Condition EstimationIEEE Transactions on Vehicular Technology, 2011
- Estimation of Tire-Road Friction Coefficient Using a Novel Wireless Piezoelectric Tire SensorIEEE Sensors Journal, 2010
- A Novel Traction Control for EV Based on Maximum Transmissible Torque EstimationIEEE Transactions on Industrial Electronics, 2009
- Future Vehicle Driven by Electricity and Control—Research on Four-Wheel-Motored “UOT Electric March II”IEEE Transactions on Industrial Electronics, 2004
- Road condition estimation for traction control in electric vehicle2003
- Traction control of electric vehicle based on the estimation of road surface condition-basic experimental results using the test EV "UOT Electric March"2002
- Optimal slip ratio estimator for traction control system of electric vehicle based on fuzzy inferenceElectrical Engineering in Japan, 2001
- Traction control of electric vehicle: basic experimental results using the test EV "UOT electric march"IEEE Transactions on Industry Applications, 1998