Methodology for Testing Selected Parameters of Low-Current Vacuum Electric Arc
Open Access
Abstract
This article presents the author’s methodology for testing selected parameters of a low-current vacuum arc, implemented using an innovative test stand based on a vacuum discharge chamber with a contact system mounted inside. In order to verify the validity of the adopted research methodology, as well as the correctness of the operation of the developed laboratory bench, measurements and calculations were made, among other things, of the energy and burning time of the vacuum arc, depending on selected factors, such as pressure and the delay time of the contact opening, calculated from the “passage through zero” of the sinusoid of the current flowing through the system. The tests were performed at 230 V and a current of 5 A for two pressure values: p1 = 1.00 × 105 Pa (atmospheric pressure) and p2 = 4.00 × 10−3 Pa (high vacuum environment). It was found that the vacuum insulation technique allows a significant reduction in the value of the arc energy and the burning time of the arc. It was also observed that in the case of a high vacuum environment, the ignition of the vacuum arc occurs after a time equal to about 3 ms from the “passage through zero” of the current flowing through the system. Below this value, the phenomenon did not occur. The results obtained provide an opportunity for the design and manufacturing of vacuum switchgear, where there is the prospect of reducing the negative effects associated with the arc burning process in the contact gap.Keywords
Funding Information
- Narodowe Centrum Badań i Rozwoju (LIDER14/0129/2023)
This publication has 42 references indexed in Scilit:
- Hybrid plasma modeling of the interaction between the vacuum arc jet and the hot metallic particle near the current zeroPhysics of Plasmas, 2022
- Unified simulation of different modes in atmospheric pressure DC discharges in nitrogenJournal of Applied Physics, 2021
- Simulation of vacuum arc cathode spot movement between transverse magnetic field contactsAIP Advances, 2021
- Unified modelling of low-current short-length arcs between copper electrodesJournal of Physics D: Applied Physics, 2020
- Effect of a bidirectional coupling of an LTE arc column to a refractory cathode in atmospheric pressure argonPhysics of Plasmas, 2020
- Simulating changes in shape of thermionic cathodes during operation of high-pressure arc dischargesJournal of Physics D: Applied Physics, 2019
- Unified Non-equilibrium Modelling of Tungsten-Inert Gas Microarcs in Atmospheric Pressure ArgonPlasma Chemistry and Plasma Processing, 2019
- The effect and dynamic behavior of particles in high-current vacuum arc interruptionsJournal of Physics D: Applied Physics, 2018
- Optical absorption spectroscopy of metallic (Cr) vapor in a vacuum arcJournal of Physics D: Applied Physics, 2018
- Vacuum arc under axial magnetic fields: experimental and simulation researchJournal of Physics D: Applied Physics, 2014