Mechanical Properties of Solder-Jointed Copper Rods with Electrodeposited Sn-Zn Alloy Films
Open Access
Abstract
Enforced solid solution type Sn-Zn alloy films were electrochemically synthesized on Cu substrate from an aqueous solution containing citric acid complexes. The electrodeposition behavior of Sn-Zn alloys was classified to a normal co-deposition type, in which electrochemically nobler Sn deposits preferentially compared to Zn. Electrodeposited Sn-Zn alloy films were composed of a non-equilibrium phase, like an enforced solid solution, which was not observed in an equilibrium phase diagram of an Sn-Zn binary alloy system. By applying a thermal annealing process at 150 °C for 10 minutes, a pure Zn phase was precipitated from an electrodeposited Sn-based solid solution phase with excessively dissolved Zn atoms. During the soldering process, intermetallic phases such as Cu3Sn and Cu5Zn8 were formed at the interface between an Sn-Zn alloy and Cu substrate. Tensile strength and fracture elongation of solder-jointed Cu rods with Sn-8 at.%Zn alloy films reached ca. 40 MPa and 12%, respectively.Keywords
Funding Information
- Japan Society for the Promotion of Science (JSPS: 18H01754)
This publication has 33 references indexed in Scilit:
- Electrodeposition of Cu-Sn alloys from a methanesulfonic acid electrolyte containing benzyl alcoholElectrochimica Acta, 2017
- Effects of hydroquinone and gelatin on the electrodeposition of Sn–Bi low temperature Pb-free solderElectrochimica Acta, 2013
- Electrodeposition and characterisation of Sn–Ag–Cu solder alloys for flip-chip interconnectionElectrochimica Acta, 2010
- Effect of Small Addition of Zinc on Creep Behavior of TinMATERIALS TRANSACTIONS, 2010
- Nucleation of Sn and Sn–Cu alloys on Pt during electrodeposition from Sn–citrate and Sn–Cu–citrate solutionsElectrochimica Acta, 2009
- Effect of surfactant on the bath stability and electrodeposition of Sn–Ag–Cu filmsSurface and Coatings Technology, 2008
- Cu–Sn coatings obtained from pyrophosphate-based electrolytesSurface and Coatings Technology, 2007
- On the advantages of using a hypoeutectic Sn–Zn as lead-free solder materialMaterials Letters, 2007
- Effects of plating parameters on alloy composition and microstructure of Sn–Bi electrodeposits from methane sulphonate bathSurface and Coatings Technology, 2006
- Viscosity transition of ZnO-containing rosinMaterials Letters, 2005