Local loss coefficients inside air cavity of ventilated pitched roofs
- 1 December 2017
- journal article
- research article
- Published by SAGE Publications in Journal of Building Physics
- Vol. 42 (3) , 197-219
Abstract
Pitched roofs with a ventilated air cavity to avoid snow melt and ensure dry conditions beneath the roofing are a widely used construction in northern parts of Europe and America. The purpose of this study has been to determine pressure losses at the inlet (eaves) and inside the air cavity consisting of friction losses and passing of tile battens. These results are necessary to increase the accuracy of ventilation calculations of pitched roofs. Laboratory measurements, numerical analysis as well as calculations by use of empirical expressions have been used in the study. A large difference in the local loss coefficients depending on the edge design and height of the tile batten was found. The local loss coefficients of the round-edged tile battens were approximately 40% lower than the local loss coefficients of the sharp-edged tile battens. Furthermore, the local loss factor increased by increasing height of the tile batten. The numerical analysis was found to reliably reproduce the results from the measurements.Keywords
This publication has 7 references indexed in Scilit:
- Ventilated wooden roofs: Influence of local weather conditions - measurementsEnergy Procedia, 2017
- Highly insulated pitched roofs resilient to air flow patterns: Guidelines based on a literature reviewEnergy and Buildings, 2016
- Ventilated rainscreen cladding: Measurements of cavity air velocities, estimation of air change rates and evaluation of driving forcesBuilding and Environment, 2013
- Penetration of snow into roof constructions—Wind tunnel testing of different eave cover designsJournal of Wind Engineering and Industrial Aerodynamics, 2007
- Hygrothermal Performance of AtticsJournal of Thermal Envelope and Building Science, 1998
- Field measurements of ventilation rates in atticsBuilding and Environment, 1995
- Ventilating attics to minimize icings at eavesEnergy and Buildings, 1994