Predicted Emissions from a Methanol-Fueled “Electrochemical Automobile Engine” Based on a PEM Fuel Cell
Authors:
- 1 October 1995
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
A simulation of a “fuel cell engine” (FCE) based on a proton exchange membrane (PEM) fuel-cell stack was developed using a process simulation software package. Rates of emissions of unburned methanol, formaldehyde, CO and NOx were calculated based on chemical equilibria. The predicted rates of emissions for unburned methanol, formaldehyde and CO were found to all be less than 1 μg/km. This is considerably less than has been reported in the literature but represents a theoretical limit which should be achievable as effective catalytic-combustion systems are developed for hydrogen/methanol fueled burners. The worst-case rate of NOx emissions was shown to be less than 0.03 g/km (0.05 g/mi.). It was found that increasing the rate of heat transfer in the steam reformer, which converts the methanol to a hydrogen-rich gas, significantly reduced the rate of NOx emission due to the lower burner temperatures which could be used. The results indicate that, in terms of emissions reduction, a methanol fueled FCE is an excellent long-term alternative to the ICE.Keywords
This publication has 9 references indexed in Scilit:
- Automakers Move Toward New Generation Of 'Greener' VehiclesChemical & Engineering News, 1994
- Polymer electrolyte fuel cells: a review of recent developmentsJournal of Power Sources, 1994
- Fuel cell road traction: an option for a clean global societyJournal of Power Sources, 1994
- Utilization of methanol for polymer electrolyte fuel cells in mobile systemsJournal of Power Sources, 1994
- Parametric modelling of the performance of a 5-kW proton-exchange membrane fuel cell stackJournal of Power Sources, 1994
- Fuel Cell Systems1993
- US Department of Energy fuel cell program for transportation applicationsJournal of Power Sources, 1992
- Fuel cells for transportationJournal of Power Sources, 1990
- Development of the Second Generation Methanol Lean Burn SystemSAE International Journal of Advances and Current Practices in Mobility, 1989