Experimental Investigation of Orifice Design Effects on a Methane Fuelled Prechamber Gas Engine for Automotive Applications
- 4 September 2017
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Due to its molecular structure, methane provides several advantages as fuel for internal combustion engines. To cope with nitrogen oxide emissions high levels of excess air are beneficial, which on the other hand deteriorates the flammability and combustion duration of the mixture. One approach to meet these challenges and ensure a stable combustion process are fuelled prechambers. The flow and combustion processes within these prechambers are highly influenced by the position, orientation, number and overall cross-sectional area of the orifices connecting the prechamber and the main combustion chamber. In the present study, a water-cooled single cylinder test engine with a displacement volume of 0.5 l is equipped with a methane-fuelled prechamber. To evaluate influences of the aforementioned orifices several prechambers with variations of the orientation and number of nozzles are used under different operating conditions of engine speed and load. The orifices and therefore the intermediate products of the combustion emanating the prechamber are either aimed towards the squish area of the main chamber or perpendicular to the piston surface. With a constant diameter of the orifices the overall flow area varies proportional to the number of nozzles. Thereby, the impact of timing and duration of the methane injection into the different prechambers, the extension of the lean misfire limit and a variation of the ignition timing are investigated. To rate the overall combustion process the exhaust emissions of unburnt hydrocarbons and nitrogen oxides are examined. Considering the reference point the combustion duration was reduced between 30 and 45 percent compared to conventional spark plug operation using prechambers, whereby the combination of number and orientation of orifices plays an important role.Keywords
This publication has 25 references indexed in Scilit:
- On ignition mechanisms of premixed CH 4 /air and H 2 /air using a hot turbulent jet generated by pre-chamber combustionApplied Thermal Engineering, 2016
- Analysis of combustion of methane and hydrogen–methane blends in small DI SI (direct injection spark ignition) engine using advanced diagnosticsEnergy, 2016
- Extensive Investigation of a Common Rail Diesel Injector Regarding Injection Characteristics and the Resulting Influences on the Dual Fuel Pilot Injection Combustion ProcessSAE International Journal of Advances and Current Practices in Mobility, 2016
- Investigation of a Methane Scavenged Prechamber for Increased Efficiency of a Lean-Burn Natural Gas Engine for Automotive ApplicationsSAE International Journal of Engines, 2015
- A study of the influence of orifice diameter on a turbulent jet ignition system through combustion visualization and performance characterization in a rapid compression machineApplied Thermal Engineering, 2015
- Prechamber NOx formation in low BMEP 2-stroke cycle natural gas enginesApplied Thermal Engineering, 2009
- Detailed investigation of ignition by hot gas jetsProceedings of the Combustion Institute, 2007
- Investigation of the prechamber geometrical configuration of a natural gas spark ignition engine for cogeneration: part II. ExperimentationInternational Journal of Thermal Sciences, 2003
- Effect of Dimensions of Prechamber on Lean Burn Gas Engine.JSME International Journal Series B, 1994
- Emission Reductions Through Precombustion Chamber Design in a Natural Gas, Lean Burn EngineJournal of Engineering for Gas Turbines and Power, 1992