The influence of drawing pressure on the properties of PET/PA6 bicomponent spunbonded fibers
Authors:
- 28 July 2016
- journal article
- research article
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 46 (5) , 1281-1293
Abstract
The properties of fibers were significantly affected by drawing during the spunbond process. In this paper, the influence of drawing pressure on the properties of spunbonded PET/PA6 hollow pie wedge bicomponent filaments was studied, and their performance was characterized by differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, Beion F6 fiber fineness tester, and single fiber strength tester. The hollow pie wedge bicomponent fiber had a distinct interface between the two polymers due to poor compatibility. With increasing of drawing pressure, diameter of the fibers reduced regularly. When the drawing pressure increased, both the degree of crystallinity and orientation of bicomponent fibers enhanced, and the melting point of polyester component increased as well. Furthermore, with increasing of drawing pressure, the breaking strength of the fibers increased, but the breaking elongation and linear density decreased.Keywords
This publication has 10 references indexed in Scilit:
- Acoustical absorptive properties of spunbonded nonwovens made from islands-in-the-sea bicomponent filamentsThe Journal of the Textile Institute, 2013
- Influence of polymer type, composition, and interface on the structural and mechanical properties of core/sheath type bicomponent nonwoven fibersJournal of Materials Science, 2012
- Aerosol filtration properties of PA6/PE islands-in-the-sea bicomponent spunbond web fibrillated by high-pressure water jetsJournal of Materials Science, 2011
- Combination Technology of Spunbond & SpunlaceAdvanced Materials Research, 2011
- Formation of novel thermoplastic composites using bicomponent nonwovens as a precursorJournal of Materials Science, 2011
- High surface area nonwovens via fibrillating spunbonded nonwovens comprising Islands-in-the-Sea bicomponent filaments: structure–process–property relationshipsJournal of Materials Science, 2009
- Hydro‐entangled bi‐component microfiber nonwovensPolymer Engineering & Science, 2009
- The influences of slot width of an attenuator on the properties of PET spunbonded fibersJournal of Materials Science, 2007
- High strength nylon micro‐ and nanofiber based nonwovens via spunbondingJournal of Applied Polymer Science, 2007
- An investigation of fiber splitting of bicomponent meltblown/microfiber nonwovens by water treatmentJournal of Applied Polymer Science, 2004